How To Replace Taillight Bulb 2000-02 Chevy Cavalier
Created on: 2013-08-02
If the tail lights or the bulbs need to be replaced, this video will show you how to do it yourself
-
step 1 :Replacing a Bulb
- Twist out the net clip.
- Pull back the insulation.
- Twist the socket out.
- Pull the bulb out.
- Put a new bulb into place.
- Twist the socket back into place.
-
step 2 :Removing the Taillight Assembly
- Twist the socket out.
- Remove the three 10mm nuts on the back of the taillight.
- Pull the taillight straight out.
-
step 3 :Replacing the Taillight Assembly
- Line up the taillight assembly and press it into place.
- Replace the socket.
- Replace the three 10mm nuts.
- Put the insulation back into place.
- Replace the net clip.
Tools needed
-
10mm Socket
Ratchet
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm John from 1A Auto. I hope this how to video helps you out. The next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to service the tail light on this 2000, Chevy Caviler, same for any 2000 to 2002. It's a pretty easy process for it. You will see everything you need if you are just looking to change a bulb, as well as, you see the whole process if you want to change your rear taillight if it is broken or damaged in some way. If you are just looking to change a bulb, you don't need any tools. If you are changing a broken taillight assembly, then you will need either a 10mm wrench or a 10mm socket with a ratchet.
Open your trunk and if you have a cargo net, remove it from the little knot there, and twist that counterclockwise, and remove it. Then you can pull your insulation down out of the way. If you are just looking to change a bulb or if you are going to change the light, the taillight bulb simply turns a little bit counterclockwise and comes out. The bulb pulls straight out and pushes back in.
To change the entire taillight, there are three 10mm nuts. The best tool to use is a socket and ratchet, as you see here, but a wrench would work as well. Then, just pull the taillight out from the body. If you want to disconnect the socket, there is just a little tab, push down and pull. Okay, new taillight from 1A Auto is on the bottom. You can see it is exactly the same as the original. Put the taillight in place. You can put the bulb in there at first or you can wait until afterwards. But, get it in place and get the studs through correctly and then start on the 10mm nuts.
We will speed up here as we put those nuts on and then tighten them up. You don't want to over tighten them. You want to just tighten them nice and firm. Okay, now, make sure that your bulb and socket are in place and nice and secure. Then put your insulation back in place. Tuck the top right up under. Then put that retaining bolt in that holds your net, if you have it, and put the net back in place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
Shop Products
2000-02 Chevrolet Cavalier Driver & Passenger Side Outer 2 Piece Tail Light Set DIY Solutions LHT07469
Part Details:
- 2 Piece
- (1) Passenger Side Outer Tail Light
- (1) Driver Side Outer Tail Light
How To Replace Third Brake Light Bulbs 1996-2007 Ford Taurus
This video from 1A Auto shows you how to replace the third brake light bulbs on your 96-07 Ford Taurus. Save money and do it yourself!
