How to Replace Tailgate Striker Bolt 1999-2013 Chevy Silverado

1. step 1 :Removing the Striker Bolt 0:31

   • Make sure the tailgate is lowered
   • Remove the tail light, using a Phillips head screwdriver to remove the screws (note: depending on the vehicle, you might need a Torx screwdriver)
   • Grabbing the tail light from the bottom, pull it out and set it aside
   • Use a 15mm wrench to loosen the nut and a T40 Torx socket and ratchet to loosen the striker bolt
   • Once loosened, the nut and bolt can be removed by hand

2. step 2 :Installing the Striker Bolt 2:34

   • Line up and insert the striker bolt and nut with the location of the old striker bolt (you can also mark the location prior to inserting)
   • Use a T40 Torx socket and ratchet and a 15mm socket and torque wrench to torque the nut and bolt to 26-foot pounds
   • Line up and press the tail light back into place
   • Reinsert the screws and use a Phillips head screwdriver to tighten them

Tools needed

• 15mm Wrench

  Torque Wrench

  T40 Socket

  Phillips Head Screwdriver

  15mm Socket

  Ratchet