Created on: 2016-05-02
New Tailgate Cable (with Attaching Hardware) from 1AAuto.com How to repair, install, fix, change or replace broken, snapped, rusted, frayed or cut tail gate cables or straps on 02, 03, 04, 05, 06, 07, 08 Dodge Ram 1500, 2500, 3500
Flat Blade Screwdriver
T45 Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you tailgate cable replacement. This is a 2008 Dodge Ram 1500, and it's the same for any 2003-2008, as well as a couple of the other years of the 3500 and 2500.
Items you'll need include a new tailgate cable from 1AAuto.com, flat blade screwdriver, and a T45 torx bit and ratchet.
To replace your tailgate cable, lift up on your tailgate a little bit and this tab is a little bent so I'm just using a screwdriver. Help me pry it up, pull it off, and make sure you have something supporting it where you have a good tailgate cable on the other side.
There's a T45 bolt. Remove that. Best to have a socket bit and a ratchet. The old one comes off.
New cable from 1AAuto. Pull it right out. Cable is exactly the same and then there's a little locking washer.
So, we can put the cable right on and then this goes with the long side there so you can put it here. Put the bolt through and then put the locking washer on, and then I need to loosen this up a little bit. This is a shouldered bolt, so make sure that the cable comes out on the collar of the bolt and then tighten it up.
Now that it's tightened, it should move freely.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
How to repair, install, fix, change or replace broken, snapped, rusted, frayed or cut tail gate cables or strapson 2004-2012 Chevy Colorado models.