Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Tail Lights Bulbs 07-08 Dodge Ram

Share on:

How to Replace Tail Lights Bulbs 07-08 Dodge Ram

Created on: 2016-04-18

Check out this video for quality and detailed instructions on how to replace or service the tail light and bulbs on your 07-08 Dodge Ram.

  1. step 1 :Removing the Tail Light
    • Lower the tail gate
    • Remove the T25 Torx bolts from the tail light bracket
    • Pull the tail light out
    • Disconnect the tail light wiring harness
  2. step 2 :Servicing the Bulbs
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step 3 :Installing the New Tail Light
    • Reconnect the wiring harness to the tail light
    • Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
    • Replace the T25 Torx bolts into the tail light bracket

Tools needed for replacement

  • Star Drivers & Sockets

    T25 Driver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video we're going to show you tail light replacement. This is a 2008 Dodge 1500 and same for a 2007-2008 1500, 2007-2009 2500 and 3500 and the only things you'll need is new tail light from 1AAuto.com and a T25 Torx driver.

Open up your tailgate. Each light has two screws. These are T25 Torx. It's best to have a socket like this and a ratchet handle. With those screws out, grab it right in behind here and pull. We're going to pull this little clip off and put it back in the bed of the truck.

If you're just looking to change your bulbs, turn counterclockwise and pull out. Obviously, the light is now free and these bulbs just pull out and push back in. If you needed to disconnect your connections, there's just tabs on the side. You would use a small flat blade screwdriver and press the tabs on that one. This one just pull this little red safety tab down and this tab and disconnect.

Push the safety tab on, and our original light is in good shape, so we're just going to reinstall it. Put the lower one in clockwise to lock, upper one in, and clockwise to lock. Just peak in and make sure that these go into the hole. Just push the light in and put your two T25 Torx screws back in place.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.

Tools needed for replacement:

    Star Drivers & Sockets

  • T25 Driver

2007 - 2008  Dodge  Ram 1500 Truck
2007 - 2009  Dodge  Ram 2500 Truck
2007 - 2009  Dodge  Ram 3500 Truck
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...