Created on: 2018-04-03
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped tail light / brake light on 14 Toyota Tundra.
Socket Extensions
T30 Driver
Ratchet
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tail gate. To remove the tail lamp assembly, there's a T30 Torx bolt here and a T30 Torx bolt here. Using a torn bit and a ratchet, remove them. Let's pull it straight out. Pulling it off of these two pins here. To remove the tail lamp assembly. Push the harness out of this connector here. Just unplug these connectors, pushing in the locks to unlock them. Do the same for all three. Take the assembly off.
Here's the original tail light assembly pulled from our vehicle. Here's our brand new one from 1aauto.com. It is an exact match from the original. It will fit great and work great in your vehicle.
Reinstall it. Plug all our harnesses back on. They'll click when they lock into place. Push this back in. And these two tabs is going to go on the lower part. One will go on the upper one. Get them lined up. Push them in. Reinstall our bolts. Tighten them up. This procedure will be identical for the other side. It gets tight. Just stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped third brake light on 06 Cadillac CTS