How To Replace Tail Light and Bulb 1998-2002 Oldsmobile Intrigue
Created on: 2011-10-05
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped taillight on Oldsmobile Intrigue, years 98, 99, 00, 01, and 02.
-
step 1 :Removing the Taillight
- Remove the net.
- Remove the thumb screw.
- Pull the insulation back.
- Remove the two thumb screws.
- Pull the taillight back and off.
-
step 2 :Changing a Bulb
- Twist the socket out.
- Pull the bulb straight out.
- Push a new bulb into place.
- Twist the socket back into place.
-
step 3 :Replacing the Taillight Assembly
- Twist out all of the sockets and gaskets from the old taillight.
- Twist the sockets and gaskets into place on the new taillight.
- Line up the taillight and push it into place.
- Replace the thumb screws.
- Replace the insulation.
- Replace the thumb screw and net.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi. I'm Mike Green. I'm one the owners of 1A Auto. I want to help you save time and money, preparing and maintaining your vehicle. I'm going to use my 20 plus years of experience, restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com, the right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you taillight replacement on this 99 Olds Intrigue, same as a 98 to 03. We're going to show you both replacing the entire assembly, as well as, if you need to just service the bulbs, and no tools are necessary.
Whether you're replacing a bulb or replacing your entire taillight, because it was damaged. You're going to start out in the trunk here. If you got a net on your car, pull that top off and unscrew this thumb screw. Pull this back. You'll see there's another thumb screw here. One further in there. On this side, it's the same thing. This vehicle has a 12 CD player. It gets in your way a little bit, but you can still get back in there, and get those out. Pulls out.
If you're just looking to change the bulbs, all these bulbs. A little tab that locks them. Turn counter clockwise. Pull out all the bulbs. Pull right from the socket like that. Make sure that gasket goes back on. If you need to change your whole taillight assembly, because of damage, you remove all your bulbs. Make sure that your gaskets stay with the lights themselves. A new light from 1AAuto. Obviously, my old one was fine, but we'll just stick this one in, just to make sure it fits OK. All the lights are secured in. Twist clockwise and lock them. I look the light in.
I'm back on the inside. I use a. There are two different types of fasteners. There's this larger wing thumb screw. We use those for these two lowers ones. Tighten the two lower ones first. Push your pad back in. This top one is different from the other two. It has the ears, so you can put the net on. There you go.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Inner Tail Light 2011-16 Chevy Cruze
For one reason or another, you may find yourself needing to replace more than just a bulb. Broken or hazy tail lights reduce your visibility to other drivers. TRQ direct fit tail light assemblies are an affordable option that’s easy to do yourself! How to replace the inner tail light housing on your 2011-16 Chevy Cruze.
