Created on: 2011-12-07
Need to replace the tail light housing? This video will show how to accomplish this easy repair yourself
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to replace a taillight on this 2002 Toyota Tacoma. You might want to replace it if you've backed into something or something like that. The only tools you'll need are a Phillips screwdriver and a flat-blade screwdriver.
There's four Phillips screws recessed into the light. I'm just going to speed it up as I remove those four screws. Once you remove the screws, behind here, there's a little tab right here, press it down and disconnect. Use a flat-blade screwdriver. There's little clips in here. Push down on the top of the clip and push it out, and up on the bottom of the clip. Push it out. There's another one right here.
New light from 1A Auto comes with those clips already installed, so plug it in here. Guide both of those clips right in. So you've got the clips on the inside part. Now you just guide those screws for the outside in where they're suppose to go. Tighten them up and you've got a nice taillight installed.
We hope this helps you out, brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the internet and in person.
This video shows how to change the reverse light bulbs and remove and install the reverse light housings yourself on the 98-05 Volkswagen Beetle