Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Tail Light 01-05 Buick LeSabre

Share on:

How to Replace Tail Light 01-05 Buick LeSabre

Created on: 2011-06-08

This 1A Auto video shows you how to replace the tail lights on your 00-05 Buick LeSabre. Check it out now to do it yourself and save some money!

  1. step 1 :Removing the Taillight
    • Remove the thumb screws.
    • Pull off the trim.
    • Remove the three 10mm nuts.
    • Pull the taillight straight out.
    • Twist and pull out each socket.
  2. step 2 :Replacing the Bulbs
    • Pull the bulb out.
    • Push a new bulb in.
  3. step 3 :Replacing the Taillight
    • Twist each socket into place.
    • Line up the taillight and push it into place.
    • Replace the three 10mm nuts.
    • Replace the trim.
    • Replace the thumb screws.

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    10mm Socket

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

In this video, we're going to show you how to replace your rear taillights, if you're just replacing the bulbs or if you've had one broken and you need to get a new one from 1A Auto. Pretty easy procedure. The only tool you'll need is a 10mm wrench or deep socket and ratchet.

Replacement of a tail light on a LeSabre. Pretty easy. We're going to start in the trunk. Start by removing these two thumb screws that hold this trim. Then you want to pull the trim back, and you want to pull it up and out of the way. Now, you pull this back, and there's three 10mm nuts here, here, and here. We'll remove those.

Okay now, light, pull out, and your bulbs, you just twist and pull. Twist and pull. A little clip here. Obviously, you can take and replace your light with a new light from 1A Auto if broken. If you're just replacing the bulbs, they pull out, push back in. Same with this little one.

Re-installation, reverse the procedure. Then twist. Push that in. Twist until it locks. Put the harness back correctly. Into place, push it in. Then tighten it up snug. They don't have to be too tight, though. Okay, put that into place, and these actually just kind of push right back on.

We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

2001 - 2005  Buick  LeSabre

01-05 Buick Lesabre 1/4 Panel Mtd Taillight Pair

2001-05 Buick LeSabre 2 Piece Tail Light Set DEPO

Part Details:

  • 2 Piece
  • Features and Benefits
How to Replace Windshield Washer Reservoir 00-06 Chevy Suburban

How to Replace Windshield Washer Reservoir 00-06 Chevy Suburban

Watch this video to learn how to fix a washer fluid leak. The experts at 1A Auto show how to replace the windshield washer fluid reservoir on your 00-06 Chevy Suburban or Tahoe; or GMC Yukon.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...