How to Replace Strut Tower Brace 2010-15 Chevy Camaro

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

If your Camaro didn't come with a strut tower brace, or if your strut tower brace is damaged in some way, you may want to install one. It'll stiffen up the front end of your vehicle. It's quite easy to install. It sits right into place with all the factory holes. It even comes with the hardware itself.

There's six bolts. They thread right into the factory mounting holes on each side of the strut towers. We'll just hand-tighten them at first until we get all the bolts in. On the opposite side, put the bolts in. Again, just hand-tighten them until everything is in. It's a 13 millimeter socket that you're going to want to use. Once all of the bolts are in and hand-tight, we're going to want to torque them to 16 foot-pounds, which is the factory specification. At that point, the installation is complete.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.