How to Replace Spark Plug Wires 2000-06 GMC Yukon
Created on: 2020-03-30
Watch this video to learn how to install a set of new spark plug wires on your 2000-06 GMC Yukon.
You can move these heater hoses out of the way, just pull them out of the bracket and slide them to the side. Disconnect the wire at the plug. You can give it a twist and pull it off. Disconnect the wire at the coil, do the same. Twist it. Slide it right off.
Take the new one. This new one has a little bit of dielectric grease in it. But if it doesn't, you can always add some. Slide the part on into the coil, lock it in place. And then put the other part for the spark plug and lock it down. And you can do the same with the other ones. And move these heater hoses, put them back in the bracket.
Shop Products
Chevrolet GMC Cadillac Hummer 9 Piece Ignition Kit TRQ Performance ICA30510
Part Details:
- 9 Piece
- Red
- Performance
- Performance
- (1) Performance Spark Plug Wire Set
- (8) Performance Ignition Coils
Plug Wire Route on a Z28 IROC-Z Trans AM or Formula 305 or 350 V8
How to repair, install, fix, change or replace old, corroded, rusted or defective spark plugs as well as the correct routing of the plug wires on Chevy Camaro Z28 IROC-Z Trans AM or Formula 305 or 350 with a V8 model years 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92.
