1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How to Replace Side View Mirror Glass 2003-07 Toyota Tundra

Created on: 2018-10-19

How to repair, install, fix, change or replace a broken, smashed, cracked, or shattered side view mirror on 03 Toyota Tundra

  1. step 1 :Removing the Side View Mirror Glass
    • Place painter's tape on the glass in the shape of a Z
    • Pull the glass all the way to one side to release it
    • Disconnect the wiring harness
  2. step 2 :Installing the Side View Mirror Glass
    • Connect the wiring harness
    • Grab the tab firmly, tilt it to the side, and pull it off
    • Transfer the tab to the slots in the mirror housing
    • Line up the mirror glass and press it into the side view mirror, starting with pressure at the bottom and working up top

Tools needed

  • Gloves

    Painter's Tape

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Hi, everyone. Sue here at 1A Auto. Today, we're going to show you how to remove the glass part of your rear-view mirror. The mirror itself, not the assembly, just the glass, on an '03 Tundra. So, if you need that part, or any other part for your car, click on the link below and head on over to 1aauto.com.

To get better access with the glass, you can actually tilt the mirror out and lock it. It's a good practice to not damage yourself, or cut yourself, is to tape up the glass. I like to tape it, it might break, it might not. But I also like my fingers non-bleeding, so we'll just do it all this way and hope we get it good.

You push it all the way to one side, like that, and you reach your fingers in, and you give it a good pull. There it is.

Here's your electrical connectors, for the heated glass. All you would do is just pull on that tab. Your new mirror is going to come with these new plastic bushings. Make sure you look up heated mirror, if you have them.

To reinstall it, you just reverse the procedure. Put those both on. So, I just pulled the tab off of here, out of here. Grab it firmly, tilt it to its side and just watch it pop. What I'm going to do is, I'm going to install them the reverse way, on here first. Spring slide, on that, just push it on.

They're really greasy so you've going to put a rag in your hand, or something, to stop them from sliding around. There we go. Perfect. Now I'm going to line up. See how the bottom here has a slot? You can go north, south, or east, or west. So, I'm going to turn this one at that angle. You'll see better, when you actually do it, how they have notches on them. That way, we should be able to line it up. Give it a firm push. There we go.

Push down at the bottom, at an angle, because you've got to get the center piece, that has a bar on it, in like a round cup. So, go at the bottom, and sneak up on it, and snap it up to the top. All's the best advice I can give you. Other than that, the glass survived. We can peel the tape off and clean the mirror. After installation of the glass, always make sure the mirror works in the up and down, or the side-to-side motion, and you should be done.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

2005 - 2007  Toyota  Sequoia
2003 - 2007  Toyota  Tundra

How To Replace Broken Mirror Glass 2004-13 Ford F150 Truck

Watch this video to learn how to fix a broken mirror. The experts at 1A Auto show you how to replace a cracked or shattered mirror glass on your 04-13 Ford F150.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.