Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How To Replace Side Rear View Mirror 98-02 Honda Accord

Share on:
  1. step : Remove the door panel (1:00)
    • Remove the triangle panel by prying it up with a flat blade screwdriver.
    • Unscrew the Phillips screws from the door pull.
    • Pull the switch panel.
    • Unplug the wiring harness.
    • Lift the door panel up and off.
    • Disconnect the door latch and lock.
    • Unplug all your wiring harnesses.
  2. step : Remove the side mirror (4:00)
    • Disconnect the defrost wiring to the mirror.
    • Unbolt the 8mm bolts securing the mirror.
  3. step : Install the new side mirror (5:07)
    • Plug in the mirror wiring.
    • Anchor the mirror by bolting in the 8mm bolts.
  4. step : Install the door panel (6:37)
    • Connect the wiring harnesses to the door panel
    • Connect the door handle latches
    • Lift the door panel into place
    • Connect the switch wiring harnesses
    • Push in the switch panel
    • Insert the Phillips screws into the door pull
    • Push on the triangle panel
    • For more detailed door panel reassembly instructions, see our other videos.

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.

Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience, restoring and repairing cars and trucks like this to show you the correct way to install parts for 1AAuto.com. The right parts installed correctly that's going to save you time and money. Thank you and enjoy the video.

In this video, we're going to show you a review or side review mirror replacement on this 2000 Honda Accord, same as any '98 to '02. The tools you'll need are a flat blade screwdriver, a Philip's screwdriver and an 8 mm socket with a ratchet and an extension or just a 8 mm wrench. We're going to start by removing this triangle panel by pulling it off. You're going to pull a little pin out here and there's two Philip screws, one you can see right here, on your vehicle it may have a little trim door in front of it and then the other one, you can see down in your armrest or your pull handle here, just use a screwdriver to pry up and you can see it right in there. I'm just going to use a little flat blade screwdriver, pull out this pin here. It won't open for me.

It's a Phillip's screwdriver here too. Okay, oops that went flying. Keep track of it. Okay, we'll remove this Philip screw and this one. Okay, now this panel right here, you can just kind of grab this side and pull, it just has a couple of clips that go in there. Now you will want to take your switch panel, pull it up, back and out and then all of these connections just have little buttons on there. This blue one, the button is right, push the button down, disconnect. Brown one, the button is here, disconnect and this grey one, the button is right, disconnect. Now right here, your doors handle pull it forward, and then out. You can see it, there's a little clip right here, just take your thumb, pull the clip off and then the rod pops up and out and then a little connector here. Okay, and after that just take your hand, put it in behind and there are some clips. Pull and you want to lift here, the door panel up and off. Now I'm behind again, this is your courtesy light, just twist it counter clockwise and pull it out and then there's another connector here, push the button, disconnect it and your door panel is off.

Your mirror is mounted with three 8 mm bolts. Lead comes down here, just a little button there, press it, pull that lead out. Regular screwdriver will help you pry this clip out here, kind of work it back and forth, and it comes out. Then just remove these three 8 mm bolts. Yours is going to stick a little bit, comes out. My original mirror, here's my new mirror from 1A Auto, you can see that they're all the same. Okay the most important part, the plug from 1A Auto, going to plug right into your vehicle's harness. Mirror comes molded in black, if you want it, you can obviously install as is and it will fix your problem with the broken mirror. If you want to paint it to match, I would suggest taking your vehicle to an automotive parts store that has a paint department and they can usually match your paint based on the car's paint code, which they can help you find, then they'll put some paint into an air charged spray can and you can paint the mirror yourself.

Obviously, my original mirror is fine, so I will show you how to reinstall just using that and it's just a reverse of the procedure. Put your wire through and this is if you have a power mirror, obviously a manual mirror is even easier. Bring that through, start our nuts. When you tighten these, you want to be firm but you don't have to be extremely tight. Install and now you want to put your door panel on. Okay now I'm going to speed up through putting the door panel back on. It's just a reverse of the procedure, if you wanted this part of the video in regular speed just check out our other videos for the Honda Accord door panel removal and replace.

We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to us toll-free 888-844-3393, we're the company that's here for you on the internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench

1999 - 2002  Honda  Accord
1998 - 2002  Honda  Accord

Mirror

1999-02 Honda Accord Driver Side Mirror DIY Solutions

This part replaces:

  • Partslink HO1320139
  • Hollander 128-53133
  • OE # 76250S82K21ZH
  • DIY Solutions MIR00867

Part Details

  • Mirror Operation: Power
How To Diagnose Power Window Problem - Is the Switch or Motor bad?

How To Diagnose Power Window Problem - Is the Switch or Motor bad?

Watch this video to learn how to diagnose your power windows. The expert mechanics at 1A Auto show you how to test a window that's broken, worn out, or won't roll up or down. You'll learn how to find out if it's the window switch or window motor.

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...