Created on: 2012-09-28
If the side view mirror is cracked or broken, follow the steps in this how-to video and find out how to do this easy repair yourself
Socket Extensions
Phillips Head Screwdriver
10mm Wrench
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the best service on the internet.
Hi, I'm Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a mirror on this 2003 Cavalier, pretty much the same as any '97 to '05 Cavalier. This vehicle does have the manual mirrors so this procedure is only for manual mirrors. Tools you'll need are Philips screwdriver, a 10mm wrench as well as a 10mm socket with a ratchet and extension.
Okay. Philips screwdriver, there's a screw right here. Remove it. Okay. Then this kind of lifts up. It comes off. There's some insulation back in here. Pull that out. Okay, then you have three 10mm nuts to hold this on. Okay, I'm just going to use a 10mm wrench. A little difficult to get this one, get it first. Use a 10mm wrench, get it in there and just loosen up that nut. Just takes a little bit of time. Then when you get it loose, just carefully pull it out of there. You don't want to drop it down further into the door.
Okay these two are easy to get out with a 10mm socket with an extension and ratchet. Okay. Pull and push on the mirror. Bases usually get stuck on the door. Your mirror comes right off. As you can see, my original mirror is in good shape. I am going to remount it. Mirror is from 1A Auto. They come just like the original. They're going to bolt right into place. Just need to put it in. Get it in place and make sure the studs get through. I'm just going to take my nut, put it into the socket then put it on. Do the same thing for this one down here. Okay, then lastly this one here. Carefully, I'm kind of using two fingers to get it into place and get it started. Push in on the mirror. I'll get it as tight as I can with my finger. Tighten these two here that were easy to get to. Nice and firm but not over tight. Turns in here again. Tighten it up some with the finger. Then use the wrench. Just need to get in here.
Okay, once that's tightened up put our insulation right back in. Take our trim, put it back on. Screw through, kind of peek through the back and see if the screw is going into the hole. Tighten that up. We're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
Need to replace the side view mirror on your 04-08 Chevy Malibu? Learn how in this video!