Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How To Replace Side Rear View Mirror 07-12 Dodge Caliber

Share on:
  1. step : Removing the Side Mirror (0:35)
    • Pry off the triangular trim piece at the front top corner of the door panel with a flat blade screwdriver
    • Pry off the smaller panel below the triangular panel
    • Disconnect the side mirror harness
    • Remove the three 8mm nuts holding the side mirror
    • Pull the mirror and harness straight out
  2. step : Installing the New Side Mirror (1:49)
    • Feed the side mirror harness through the door
    • Line up the studs and push in the side mirror
    • Replace the 8mm nuts on the side mirror
    • Reconnect the side mirror harness
    • Align and re-clip the triangular trim piece at the front top corner of the door panel
    • Align and re-clip the smaller panel below the triangular panel

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the side mirror on this 2008 Dodge Caliper. We show you on the driver's side, but it's the same procedure on the passanger's side. The items you'll need are new side mirrors from 1AAuto.com, an 8mm socket, a ratchet with an extension, and a flat blade screw driver.

First, pry off this triangular panel on top of your door panel. Then this small panel right here. Holding in your mirror there's three 8mm nuts. There's one there, one right here, and one right up in there. To make it easier to get to, just disconnect this harness. Just push on the tab at the top and pull it free. We'll fast-forward as Don removes those three 8mm nuts. Once those nuts are removed, you can just pull the mirror straight out. Just pull your harness through the door.

The one the right is the original mirror; the one on the left is the new mirror from 1A Auto. You can see they will mount, connect, and work exactly the same. Take your new mirror and feed the harness through the door. Then line up the studs on the mirror and push them into place. Then replace those three 8mm nuts. We'll just fast-forward as Don does this and tightens each of those up. Reconnect your harness, and make sure you tuck those wires down inside the door panel. Then line up your triangular panel and push it into place. Then replace that smaller panel below that.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

2007 - 2012  Dodge  Caliber

Mirror

2007-12 Dodge Caliber Driver & Passenger Side 2 Piece Mirror Set TRQ

This part replaces:

  • OE # 5115039AB
  • OE # 5115038AB
  • Partslink CH1321265
  • Partslink CH1320265
  • TRQ MRA04938

Part Details

  • Mirror Folding Type: Non-Folding
  • Mirror Operation: Power
  • Mirror Set Includes: (1) Passenger Side Mirror
  • Mirror Set Includes: (1) Driver Side Mirror
  • Set Quantity: 2 Piece
Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...