How to Replace Serpentine Belt Tensioner 1998-2005 Volkswagen Passat
Created on: 2012-09-19
Check out this video to learn how to replace the serpentine belt tensioner on your 98-05 Volkswagen Passat 1.8T.
-
step 1 :Remove the serpentine belt
- Locate your serpentine belt routing diagram
- Use a 17 mm wrench on the belt tensioner to loosen the tension from the serpentine belt
- Remove the serpentine belt.
-
step 2 :replace the serpentine belt tensioner
- Use your 13 mm wrench to unbolt the serpentine belt tensioner.
- Remove the old serpentine belt tensioner.
- Thread the bolts into the new serpentine belt tensioner.
- Install the new serpentine belt tensioner and tighten up the 13 mm bolts to 5 ft lbs.
-
step 3 :Install the serpentine belt
- Locate your routing diagram.
- Loop the belt around the pulleys.
- Release the tension from the belt tensioner with your 17 mm wrench to loop the belt over the last pulley.
- Tighten up the serpentine belt.
Tools needed
-
17mm Wrench
13mm Wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike from 1A Auto. I hope this how to video helps you out and next time you need parts for your vehicle, think of 1AAuto.com. In this video, we'll show you how to replace a serpentine belt tensioner on this 2003 Volkswagen Passat and this vehicle has the 1.8 liter T motor, it has a turbo motor. The only tools you'll need are a 17 millimeter wrench and a 13 millimeter wrench. In this video we just showed you replacing the tensioner itself.
If you wanted to replace the belt at the same time which is usually a good thing to do, you can check out our other videos and you'll see a video for replacing the serpentine belt on this vehicle as well. The tensioner for your alternator belt is right up here, 17 millimeter wrench, put it on there and pull on the tensioner and flip the belt off and let the tensioner back. There are three 13 millimeter bolts here. My 13 millimeter wrench on there. Here's my 17 millimeter giving me a little extra leverage. We'll just loosen that off. I'm just going to speed it up as I loosen the third one up. Then, these bolts actually pretty easily come up by hand and so that's basically what I'm doing here is once I have them loosen up just backing them out by hand. This one goes off and tensioner comes up right up and out.
New tensioner from 1A Auto. This is a great one. What I'm going to do is put these bolts into place. This makes it a little easier to get it down on there. Put the tensioner down into place here. That top bolt going in. I have two bolts going in and hand thread it in. Once again, I'll turn on the speed here as I thread those bolts in and then pull them narrowly, tighten them up with the wrench. I'm going to tighten them up. Just use your wrench. It should probably be about three, three to five pounds but we're going to tighten it with this wrench. This will do the trick. The new tensioner does come with a little stop in it so we'll put our 17 millimeter wrench on there, pull on a little bit and pull that stopper on right out. Then, slowly let back. Now, you can see that belt sticking right up through there. I'm going to grab onto my tensioner, that 17 millimeter. Pull it loose. Pull the belt right up onto the alternator, let the tensioner loose so I can see it now. My bolt actually came off of that power. Reach down there. Is that on there? Let it tight up. Just look down in see down, cranked correctly. The power straightened up correctly. It's maybe a little off here. Push it on the points a little bit more and it's all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that shifts you on the Internet and in person.
Shop Products
VW Passat Audi A4 A4 Quattro Accessory Drive Belt Tensioner TRQ BPA03814
Part Details:
- 17 mm
- Silver; Black
- 17 mm
- Smooth
- 2.97 in
- 0.67 in
- 0.67 in
- 3
- 75.35 mm
- Aluminum & Steel
- 0.83 in
- 21.2 mm
How to Replace Serpentine Belt Tensioner 1999-2014 Chevy Silverado 1500
Learn how to replace the serpentine belt tensioner in your 99-06 Chevy Silverado with this 1A Auto video.
