How To Replace Rear Wiper Motor 2000-07 Volvo V70
Created on: 2014-03-26
This video will show how to remove the trunk panel to access and replace the rear wiper motor on the 00-07 Volvo V70
-
step 1 :Removing the Trunk Panel
- Remove the four T25 Torx screws along the trunk panel
- Pull the lower and upper trunk panel down and off
-
step 2 :Removing the Wiper Arm
- Remove the wiper arm panel
- Remove the 13mm nut from the wiper arm
- Remove the wiper arm
-
step 3 :Removing the Wiper Motor
- Remove the washer hose from the wiper motor
- Disconnect the wiper motor harness
- Remove the three 10mm bolts from the wiper motor
-
step 4 :Installing the New Wiper Motor
- Insert the new wiper motor in place
- Insert the 10mm bolts to the wiper motor
- Reconnect the washer hose
- Connect the wiper motor harness
-
step 5 :Reinstalling the Trunk Panel
- Insert the lower and upper trunk panel into place
- Insert the four T25 Torx screws along the trunk panel
-
step 6 :Reinstalling the Wiper Arm
- Insert the wiper arm into place
- Tighten the 13mm nut to the wiper arm
- Push on the wiper arm panel
Tools needed
-
13mm Socket
10mm Socket
Ratchet
T25 Torx Driver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a rear wiper on this 2002 Volvo V70. The items that you'll need for this is a 10mm and 13mm socket and ratchet and a T25 Torx bit.
Start off by removing these four T25 Torx bolts that line this trunk panel. We'll fast-forward as Don removes those. Now just pull down on the panel, and it will release the clips and pull free. Then do the same to this top panel. Now you want to just pull off this panel at the end of your wiper arm. Then remove this 13mm nut. Now just pull the wiper arm free.
Your wiper motor is located right here. You want to just pull off your washer hose. Then you're going to remove these three 10mm bolts, but first just push the tab on this harness and disconnect it. Then we'll fast-forward as Don removes those bolts.
Now put your new wiper motor into place, and replace those three 10mm bolts. We'll fast-forward as Don does this.
Now reconnect your washer hose, and reconnect the harness. Then line up the clips on this panel and push it into place. Do the same thing with this panel. Just hit those clips in. Now replace those T25 screws. Now push your wiper arm back into place. Then replace that 13mm nut. Just tighten it up and push that panel back into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Windshield Wiper Blade 2008-12 Ford Escape
Watch this video to see how to replace the streaky, or worn wiper blades on your 08-12 Ford Escape. Keep ready for any weather with tips from 1A Auto
