How to Replace Rear Wiper Arm 2007-17 Ford Expedition

All right, friends. To get started on our rearward wiper arm, we're gonna go ahead and remove this cover. After that, remove this 13-millimeter nut. That washer off of there. Grab onto the wiper arm, give it a couple wiggles. We wanna try to break it free from this shaft right here. There we are. Let's go ahead and remove the wiper blade from this. To get this part, I'm just gonna open it up, slip my hand in here, and then I should be able to do that. Comes right apart. Obviously, it's a great idea to go ahead and replace the wiper blade, but if you aren't, just inspect it, make sure it's in good condition. Now, let's grab our new wiper arm.

Now is gonna be time to install our brand new wiper arm here. I'm gonna go ahead and put the blade on it first, just come in at an angle like this, give it a nice squeeze, it should latch in. At this point, I'm gonna open up the cover, I'm gonna bring it right over here, and I'm gonna put it up on here so it's coming straight across. Let's go ahead and put on that washer, and then, of course, the nut. Continuously holding the wiper arm, let's go ahead and tighten this now. That feels great. Close the latch, give it a try.