How to Replace Rear Wiper Arm 2007-14 Honda Fit
Created on: 2019-05-20
Watch this video from 1A Auto if you would like to learn how to replace a broken or loose rear wiper arm on your 07-14 Honda Fit.
-
step 1 :Removing the Rear Wiper Arm
- Remove the wiper arm trim piece
- Remove the 10 mm nut securing the arm to the wiper motor
- Pull the wiper arm off
-
step 2 :Installing the Rear Wiper Arm
- Replace the wiper arm
- Secure the wiper arm with the 10 mm nut
- Replace the wiper arm cover
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the rear wiper arm on this 2010 Honda Fit. If you need parts for your vehicle, click the link in the description and head over to 1Aauto.com.
To remove the rear wiper arm, we need to take this little trim piece off. Just slide that out, just like that. We're gonna remove this nut. I'm gonna use a 10 millimeter socket and a ratchet, and hold the arm while I loosen this up. Take that off. Just grab the arm, just rock it back and forth. Should be able to break it free.
It's a good idea to mark this before you take it off. You can mark the windshield or just take note of where it was before.
To reinstall this wiper arm, you want to line this up just like that. Take this nut and get this started. Take a 10 millimeter socket and a ratchet. Then, I'm going to hold the arm and just snug this up, not too tight. Make sure it doesn't, it's not too loose. Take this cover and just slide it over.
Thanks for watching. If you want the parts to do it yourself, check out 1Aauto.com the place for DIY auto repair.
How to Replace Wiper Motor 1988-98 GMC Sierra K1500
How to repair, install, fix, change or replace a broken,damaged, or failing windshield wiper motor on 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98 GMC Sierra K1500
