How to Replace Rear Window Switch 2008-12 Ford Escape

1. step 1 :Removing the Window Switch Trim 0:34

   • Pry up the trim cover from the door pull with a pick
   • Remove the Phillips screw from the door pull
   • Pry the window switch trim up
   • Disconnect the connector

2. step 2 :Removing the Window Switch 1:15

   • Press the tabs on either side of the switch with a flat blade screwdriver
   • Remove the switch from the trim

3. step 3 :Installing the Window Switch 1:40

   • Press the switch into the trim piece

4. step 4 :Installing the Window Switch Trim 1:50

   • Connect the wiring harness to the switch
   • Press the trim into place
   • Tighten the Phillips screw to the door pull
   • Press the trim cover to the door pull

Tools needed

• Flat Blade Screwdriver

  Phillips Head Screwdriver

  Trim Tool Set

  Pick