How To Replace Rear Window Crank 2012-19 Nissan Versa
Created on: 2018-09-18
Window crank removal tool - How to repair, install, fix, change or replace a damaged, worn out, or defective window crank handleon 14 Nissan Versa
-
step 1 :Removing the Window Crank
- Remember the position of the crank
- Insert the tool from the opposite direction of where the crank is pointing
- Push inwards
- Pull put on the crank
-
step 2 :Reinstalling the Window Crank
- Reinstall the washer
- Push the retainer clip in all the way
- Line up the rank in the same location
- Push it in until it snaps in place
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.
We're going to remove this crank, this window crank.
You're going to need a special tool to remove this. Keep in mind the position of the crank when we take it off, you can either make a little mark or put a piece of tape there or just remember where it goes.
The tool you're going to go in this side. Sometimes it's a little bit tricky. And I got it out.
The way the tool works, it slides in, moves up on this clip and spreads it, then you can pull it out.
Install this washer for where the window crank goes and then for the window crank you want to make sure that this retainer is in this position. If it's pushed out a little bit, you're going to push it back on. Bring it over here, line it up in the location where it was before, lock it in place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
When Should I Change My Truck SUV or Cars Wiper Blades
Do you know when you should change your vehicle's windshield wiper blades?
