How To Replace Rear Wheel Hub and Bearings 2007-11 Honda CR-V
Created on: 2021-02-18
This video shows you how to a new TRQ rear wheel hub assembly on your 2007-2011 Honda CR-V.
Tools needed
-
12mm Socket
Torque Wrench
18mm Wrench
Pry Bar
17mm Socket
19mm Socket
Impact Screwdriver
Flat Blade Screwdriver
Brake Caliper Hanger
Sledge Hammer
Phillips Bit in a Ratchet
Brake Caliper Compressor Tool. Single Piston. Lever Style.
Center Punch
Air Compressor
Drill
10mm Socket
Ratchet
1/2 Inch Breaker Bar
36mm Socket
1/2 Inch Impact Gun
Honda CR-V Acura RDX Rear Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA53615
Part Details:
- 2 Piece
- (1) Rear Passenger Side Wheel Bearing & Hub Assembly
- (1) Rear Driver Side Wheel Bearing & Hub Assembly
- Ball
How To Replace Rear Wheel Bearing and Seal 1992-99 GMC K1500
If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too. How to install a new TRQ wheel bearing and axle seal on your 1988-2002 GMC K1500.
