Created on: 2017-02-08
How to remove & reinstall the rear seat side cushions in a 2006 Chrysler 300
Socket Extensions
10mm Socket
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2006 Chrysler 300. We're going to show you how to remove and replace your vehicle's side seat cushions in the rear.
If you like this video, please click 'subscribe' we have a ton more information on this and many other vehicles. And if you ever need parts for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 10mm socket, ratchet, socket extension
Remove the rear seat cushion. To do this, you'll grab right where you feel the bracket underneath, and pop up firmly. There's another one on the opposite side. Lift out and remove the lower seat cushion. Pull the tabs to lower the rear seats. Fold down the little flaps and you'll find a 10 millimeter bolt for the side seat cushion on each side. Remove that with a 10 millimeter socket and ratchet. Once the bolt is removed, firmly grab the top of the seat cushion, pull out to release the clip. We'll repeat this process with the opposite side.
Reinstall the seat panel. Remember to snap the top into place, and reinstall your 10 millimeter screw. Reinstall the back seat. Make sure that you pull all of your seatbelt buckles up through the appropriate slots in the seat. Slide the rear down into place. Line up the front, and then push down to lock it in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
This video discusses DIY A/C recharge kits, and the potential harms you may be doing to your vehicle.