Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Rear Outside Door Handle 05-10 Pontiac G6

Share on:

How to Replace Rear Outside Door Handle 05-10 Pontiac G6

Created on: 2021-01-16

Watch this video from 1A Auto to see how you can replace the rear exterior door handle on your 05-10 Pontiac G6.

  1. step 1 :Removing the Door Handle
    • Remove the rubber cover on the edge of the door
    • Remove the T25 Torx screw inside the hole
    • Pull out on the handle and remove the side cover
    • Slide the handle back until it clicks, pull out the front, turn out the rest of the handle
    • Remove the rubber gasket
  2. step 2 :Installing the Door Handle
    • Install the rubber gasket
    • Insert the back end of the handle in, slide the handle forward
    • Pull out the handle and slide the side cover on
    • Insert the T25 Torx screw
    • Replace the rubber cover on the edge of the door

Tools needed for replacement

  • Ratchets & Related

    Socket Extensions

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Star Drivers & Sockets

    T25 Driver

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace an outer door handle assembly on a 2007 Pontiac G6. It's fundamentally the same for model years 2007 through 2010. I used a T25 Torx socket and extension of socket wrenches, as well as a flat blade screwdriver.

Remove the rubber cover, locate the T25 Torx screw that's in the hole. I'll fast-forward as I take that screw out. Pull out on the handle and then off with the little cover. Now, in removing the handle, slide it back till it clicks, and then pull out the front portion a little bit, and then all the way out. Then, you're just going to need to turn it a little bit to get it to come out fully.

You can remove the rubber and install the rubber gasket. Put the back end of the handle in, twisting it in, then pushing it on the front, and then slide it forward. Pull out the handle and slide the cap back on.

Be careful when reinstalling the T25 Torx screw in the handle that you don't drop it inside the door panel. Fast-forward a little bit as we tighten that up, and you can see that we just took off the original door handle and put it back on. This car didn't need a new door handle. At 1A Auto, we sell both black door handles that you can paint to match if you wanted to. We also sell chrome door handles, and we sell those in sets of four if you wanted to upgrade your G6 to chrome door handles. Put the rubber cap back on.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Star Drivers & Sockets

  • T25 Driver

2005 - 2009  Chevrolet  Equinox
2006 - 2011  Chevrolet  HHR
2005 - 2010  Pontiac  G6
2006 - 2009  Pontiac  Torrent
2004 - 2007  Chevrolet  Malibu
2008 - 2008  Chevrolet  Malibu
2007 - 2009  Saturn  Aura
2007 - 2009  Suzuki  XL-7
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...