How To Replace Rear Marker Light and Bulb 2009-17 Volvo XC60
Created on: 2014-07-07
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light on 2010 Volvo XC60.
-
step 1 :Removing the Rear Marker Light
- Pry out the back of the side marker light to remove it
-
step 2 :Servicing the Bulbs
- Twist the bulb socket counterclockwise out of the light
- Pull the bulb off of the socket
- Push on the new bulb
- Twist the bulb clockwise into the light
-
step 3 :Installing the Rear Marker Light
- Push the side marker light into place back end first
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulb as well as replace the entire assembly of a rear side marker light on this 2010 Volvo XC60. We show you on the passenger side, but the driver side is the same procedure. The only tool you need is a flat blade screwdriver or a pry tool.
Pry out on the back of your side marker light and slide it out.
Your socket for your bulb is right here. Twist it counterclockwise and pull it out. Then push the bulb in and turn it counterclockwise and pull it free.
Push your new bulb in and twist it clockwise to lock it. Then take either your old assembly or your new assembly and twist the socket in clockwise to lock.
Push the front in first and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Replace Third Brake Light Bulbs 1996-2007 Ford Taurus
This video from 1A Auto shows you how to replace the third brake light bulbs on your 96-07 Ford Taurus. Save money and do it yourself!
