1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles
How to Replace Rear Liftgate Button 08-12 Ford Escape
-
step : Removing the Interior Liftgate Panel (0:24)
- Open the liftgate
- Remove the four Phillips screws from liftgate panel
- Pull the panel down to loosen it
- Lower the liftgate
- Lift the lift glass
- Push out the upper section of the panel
- Remove the liftgate panel
-
step : Removing the Rear Exterior Liftgate Trim (1:16)
- Remove the two 11mm nuts directly behind the hatch
- Disconnect the switch electrical connector
- Squeeze the retainer clips to the side with needle nose pliers and press them up
- Press the rubber grommet on the wiring harness through
- Lower the hatch
- Slide the weather strip up a little
- Remove the exterior trim
-
step : Removing the Rear Liftgate Button (3:43)
- Disconnect the wiring harness from the switch
- Press on the retainers with a flat blade screwdriver
- Remove the switch
-
step : Installing the Rear Liftgate Button (4:22)
- Insert the switch into place
- Connect the wiring harness
-
step : Installing the Rear Exterior Liftgate Trim (4:38)
- Slide the connector and rubber grommet into the hatch door
- Press the exterior trim onto the hatch door
- Open the hatch door
- Connect the wiring harness
- Tighten the 11mm bolts to the exterior trim
-
step : Installing the Liftgate Panel (5:33)
- Insert the liftgate panel into place
- Press the liftgate panel clips in
- Tighten the four Phillips screws to the liftgate panel
- Close the liftgate
Tools needed for replacement:
- Pick
- Needle nose pliers
- Socket Extensions
- Ratchet
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 11mm Socket
General Tools
Pliers, Cutters & misc Wrenches
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
How to Perform Wheel Alignment by Yourself
Learn how to perform a wheel alignment by yourself with this helpful video from 1A Auto!
Search Videos
Go To Top
