How to Replace Rear Lift Gate Hatch Interior Door Handle 1996-2004 Nissan Pathfinder
Created on: 2018-06-28
How to repair, install, fix, change or replace a broken or snapped off interior lift gate handle on 00 Nissan Pathfinder
-
step 1 :Removing the Interior Hatch Handle
- Open the hatch
- Pry off the interior hatch handle trim buttons
- Remove the 10mm bolts from the handle
- Remove the handle
-
step 2 :Installing the Interior Hatch Handle
- Insert the handle into place
- Tighten the 10mm bolts to the handle
- Press the trim buttons on
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the lift gate. All right, we’ve got to pull this handle off. We're going to pull this trim piece off with just a straight blade screwdriver to expose the bolts. These two ten millimeter bolts. I'm going to use a ten millimeter socket and an extension and a ratchet.
Take that bolt out. I'll take this one out. And the handle will come right off. We're going to reinstall this handle. There's a little tab right there that lines up with that hole. We'll line that up and we'll take our ten millimeter bolts. That one starting, get this one started, and we'll snug them up. Just like that, not too tight, it is plastic. And then push the cover over. Push that cover over.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Damaged Wires
Check out this video to learn how you can replace damaged wires in your vehicle, then check out 1AAuto.com to get the supplies and tools you'll need to DIY
