How To Replace Rear License Plate Light 2009-17 Volvo XC60
Created on: 2014-07-07
How to replace a broken, damaged or burnt out license plate bulb to the 2010 Volvo XC60.
-
step 1 :Removing the License Plate Light
- Remove the T20 Torx screws from the light
- Remove the light
-
step 2 :Servicing the Bulbs
- Pull the bulb out of the light
- Push the new bulb in place
-
step 3 :Installing the License Plate Light
- Push the light into place
- Tighten the two T20 Torx screws
Tools needed
-
Flat Blade Screwdriver
T20 Driver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the bulb as well as change the entire license plate light assembly on this 2010 Volvo XC60. The tools you'll need for this are a T20 Torx driver and a flat blade screwdriver.
Both license plate lights are held in with two T20 Torx screws. Just go ahead and remove those on the light that you want to service. Using a flat blade screwdriver, just pry out the light. It will pull free.
You can just pull out your old bulb and push your new bulb in.
Then just push the assembly back into place and replace those two T20 screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace License Plate Light Assembly 2000-06 Chevy Tahoe
This video shows you how to install a new license plate light assembly on your 2000-06 Chevy Tahoe.
