How to Replace Rear Interior Door Handle 2014-19 Chevy Silverado
Created on: 2019-05-20
Learn how to replace a broken or loose interior door handle on your 14-19 Chevy Silverado by watching this video brought to you by 1A Auto.
-
step 1 :Removing the Rear Door Panel
- Remove the screw cover in the arm rest handle
- Remove the screw cover behind the door handle
- Remove the 7 mm screw behind the door handle
- Remove the two 7 mm screws in the arm rest handle
- Remove the 7 mm screw at the bottom of the door panel
- Pry the door panel away using trim tools
- Lift the door panel up and off
- Pull the lock rod out of the way
- Disconnect the door handle cable
- Remove the wire plastic retainer
- Disconnect the electrical connector
-
step 2 :Removing the Rear Door Handle
- Set the rear door panel facing down
- Remove the four phillips head screws securing the door handle to the door panel
- Pry the locking tab free with a flat blade screwdriver
- Remove the rear door handle
-
step 3 :Installing the Rear Door Handle
- Insert the rear door handle into the rear door panel and lock it into place
- Replace the four phillips head screws
-
step 4 :Replacing the Rear Door Panel
- Slide the window strip off the top of the door panel
- Remove the three mounting clips along the top of the door panel
- Replace those three mounting clips in their positions on the door below the base of the window
- Slide the window strip in place at the base of the window
- Reconnect the door switch electrical connector
- Replace the wire retaining clip
- Replace the door handle cable
- Pass the lock rod through the hole
- Line up the door panel with the locking clips
- Press the door panel in place
- Replace the 7 mm screw behind the door handle
- Replace the two 7 mm screws in the arm rest handle
- Replace the 7 mm screw at the bottom of the door panel
- Replace the screw cover in the arm rest handle
- Replace the screw cover in the door handle
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
Phillips Head Screwdriver
7mm Socket
Ratchet
Needle nose pliers
Trim Tool Set
What's up guys? I'm Andy from 1A Auto. In this video I'm going to who you how to replace the rear inside door handle on this 2015 Chevy Silverado. If you need parts for your vehicle, clink the link in description and head over the 1AAuto.com
I'm going to take a straight blade screwdriver. There's a little cover right here. Just get it under here. Pull that cover off. Then right here is a cover. Pull that cover off. I'm going to take a 7 millimeter socket extension and ratchet. I'm going to take this screw out here. There's two in there. And there's also one underneath here. Take all of those out.
Now we want to take some trim tools. We want to get underneath the door panel. Pry it up. There's a bunch of clicks that hold it in. Like that. Just get those all out, then we can slide the door panel out. Just like that. Pull the lock rod out of the way. This cable, want to just push down on this button. Slide the cable out and then pull the ball out. Then this wiring harness. You can pull on that wire retainer and disconnect the connector right there. Push down. Pull it up.
With the door panel flipped over we're going to take these screws out. I'm just going to use a Phillips-head screwdriver. Take that last screw out. I'm just going to take a pocket screwdriver, get underneath this little clip right here, then just push it down. Just like that. The handle will come out like this. Pull it right out.
Take this door handle. Just going to slide this in position. Slide that up through first. Once that's there then we can lock it back in place. Take the Phillips screws. I'm going to get these all started first. Then I'm going to snug these all up. Not too tight. It is plastic so just snug. There's this weatherstrip piece, or windows strip that goes at the base of the window. You're going to slide this off the door panel. And then there's these little clips. There's three of them. You need to pull those off. You can use a trim tool to slide these out. Sometimes you need some needle nose pliers. Get in there. Slide that out.
What you do is you just get in there and just try to squeeze this so that you can pull it off. Squeeze that. Pull those up. These clips are going to go right here. Just like that. All three. Put the clips on first. And then we'll take this weatherstrip or window strip, slide this in position right here. And just press it down. Just like that.
All right, now let's hook the switch up. Just push the connector on. And this wire is going to go into that. That retainer's going through that hole. Take this cable. Put the balls through there and then slide it over. Lock that in place. Take the lock rod. You need to slide it out. Thread it through the hole. Once that's thread through get all these pins lined up. Everything's lined up and you can just push the door panel on.
Now there's four screws we want to put in. There's one right there, two right here and then one down below. Install those four screws with a 7 millimeter socket and an extension. Then I'm going to take a ratchet and just tighten these down. Just snug. I'll take this cover. Slide that in there. Lock it in place. There's a cover right here. It does the same. There you go.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door. The place for DIY auto repair. And if you enjoyed this video, please click the subscribe button.
How To Replace Front Inside Door Handle 2003-07 Saturn Ion
How to repair, install, fix, change or replace a broken or snapped off interior door handleon 03, 04, 05, 06, and 07 Saturn Ion models.
