Created on: 2014-11-01
New Interior Door Handle from 1AAuto.com How to repair, install, fix, change or replace a broken or snapped off interior door handle on 04, 05, 06, 07, 08 Ford F150 pickup truck.
Socket Extensions
Flat Blade Screwdriver
6mm Socket
8mm Socket
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace a rear interior door handle on this 2005 Ford F150. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this are new rear interior door handle from 1AAuto.com, a 6mm, 8mm, and 10mm socket and ratchet with an extension and a flat blade screwdriver.
Pry out on the small panel behind the door handle. Then pry up on this panel, and just pull it forward. Lift it up and push the tab on the harness and disconnect it. Then pull out on this panel and pull it free. It helps to use the flat blade screwdriver and just pry it free. Remove the 6mm bolt, these two 8mm bolts, this 10mm bolt, and then these two 6mm bolts down here. We'll fast-forward as Mike does that. Now lift the door panel up and pull it out. Then you want to pull out your door handle cable. It's easiest with a flat blade screwdriver to pry it out. Then unclip it from the door handle, and your door panel's free.
Now just push on this tab and push the interior door handle through the door and it slides out.
On the bottom is the old interior door handle; above it is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same.
Take your new interior door handle and feed it back into the door panel. Then just line this tab up, pull it through, and it just hooks back into place.
To replace your door panel, just re-clip the door handle cable into the door handle and then push it back into place. Make sure these clips stay into the door. Then line up the tabs on the back and make sure that the lock rod goes up through the door panel and that your harness for your window switch is coming up through that hole in the door panel. Then push the door panel down into place. We'll fast-forward as Mike replaces all of those bolts. Now replace the small panel behind the door handle, reconnect your window switch, push those tabs into place, and push the panel back down. Then line this panel up, slide it down into the door panel, and push those two clips back into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to repair, install, fix, change or replace a broken or snapped off interior door handle on 02, 03, 04, 05, 06, 07, 08, 09 GMC Envoy, Envoy XL, or Envoy XUV.