How to Replace Rear Fuses 2008-14 Cadillac CTS
Created on: 2018-05-25
How to replace a rear blown or burnt out fuse on 08 Cadillac CTS
-
step 1 :Locating the fuse panel
- Open the trunk
- Remove the velcroed cover on the right side of the trunk, where the battery is located
-
step 2 :Replacing Fuses
- Use the fuse puller to remove the fuse
- Insert a new fuse of same amperage in the empty slot
-
step 3 :Finishing Up
- Reinstall the cover
- Close the trunk
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To get to the interior fuse panel, go inside the trunk. On the passenger side, this is also where the battery is. Just pull this door open. Velcro it up in place. Interior fuse panel is located inside, just above the battery.
Fuse panel layout is on the back of this panel, so it matches the orientation of the fuse panel. Whatever fuse you're looking for, you can find it here and then match it to here.
Okay, if you need to pull a fuse, there's a little fuse puller here, which is used to grab onto the fuse, pull it out. Replace the fuse, and put it back in place.
Put the cover back on, slide the two tabs into the bottom. Push it up. It just Velcros into place
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Decoding and Understanding Vehicle Identification Numbers VINs
Learn what all the letters and numbers in your vehicle's VIN stand for, and how you can use the information to identify features of other vehicles!
