Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Rear Door Speakers 14-19 Toyota Tundra

Share on:

How to Replace Rear Door Speakers 14-19 Toyota Tundra

Created on: 2021-01-15

How to install, repair, fix, change or replace a broken, damaged, or burned out door speaker on 14 Toyota Tundra.

  1. step 1 :Removing the Rear Door Panel
    • Pry up the window switch
    • Disconnect the wiring harness
    • Pry out the plastic trim from behind the door panel
    • Pry up the felt mat from the door panel
    • Remove the Phillips screw behind the door panel
    • Remove the Phillips screw from the door pull
    • Remove the clip from the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the door handle cables
  2. step 2 :Removing the Speaker
    • Disconnect the electrical connector
    • Remove the 10mm bolts from the speaker
  3. step 3 :Installing the Speaker
    • Connect the speaker wiring harness
    • Tighten the 10mm bolts to the speaker
  4. step 4 :Installing the Rear Door Panel
    • Connect the door handle cables
    • Lift the door handle into place
    • Clip the door panel into place
    • Tighten the Phillips screw to the door pull
    • Tighten the Phillips screw to the door handle
    • Press the felt mat to the door pull
    • Press the plastic trim behind the door handle
    • Connect the wiring harness to the switch
    • Press the switch on

Tools needed for replacement

  • Screwdrivers & Related

    Flat Blade Screwdriver

    Phillips Head Screwdriver

  • Sockets - Metric

    10mm Socket

  • Specialty Tools

    Trim Tool Set

Installation Video
Watch video

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

Remove the window switch. We use a plastic prying tool. You can get these from 1AAuto.com. Pry up between the silver part and the black part of the trim. I'm pushing it up off of these two clips and these clips here. Push the lock in. Pull the plug out. There's the window switch. Need to remove the plastic trim that's behind this so we can get to the screw. You're going to pull out the door handle and then take the plastic prying tool, pop it out. It's not really in there with much force. You just have these four little clips here. Put that aside.

Here at the door pull handle is a little felt mat. See if I can get this up. Now we can access the screw that's in there. Use a Phillips head screwdriver to remove the Phillips head screw that's in here. Do the same for this screw here. Need to remove this push clip here. Take a small flat-bladed screwdriver and actually push the middle of the clip in. That unlocks it. Take the plastic prying tool. Pry it up. Before you take the lower door panel off, take this upper door panel off. Trim cover. Get my plastic trim tool under here. Pry it up off the clips. With that removed, the rest of this door panel is held down with clips. You can reach behind it and give it a firm pull to pop it off the clips. Then we'll lift it up and off the doorframe.

Need to disconnect the Bowden cables. One goes to the door lock, one goes to the door handle. Pull it off like this and feed the little ball at the end out of there. Do the same for the other one. If the door clips stay in the door, use the plastic prying tool to just pop them out and then reuse them in the door panel.

To reinstall the door panel, I'm going to position and put the Bowden cables back on. White one goes to the top. Put the cable through there and clip it in place. Same for the other one. Make sure you have access to the wiring harness for the window switch, then we'll lift the door panel up.

Push it down into the opening. It's going to hook over the sheet metal just like that. Let's push it into place back on the clips. Push this trim panel back into place. It has these three clips and that clip here. Get it started. Reinstall this clip. I push it back out to unlock it. Get it started and then push it in to lock it. Reinstall the screw behind the door handle. Reinstall the screw here on the door panel. Put our little felt pad back in. Reinstall the trim behind the door handle. Just clicks into place. Reinstall the window switch. Plug it in. It'll click when it's all in place. These two lock tabs here, these ones in the back. It's going to go straight down and click into place.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set


Beginner Car Care Tire Pressure How to Check Inflate and Deflate Tires

Beginner Car Care Tire Pressure How to Check Inflate and Deflate Tires

Watch this video to learn how to properly maintain your tires. He experts at 1A Auto show you how to check your tire pressure, and fill it to the proper level.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...