How to Replace Rear Door Speaker 2014-19 Chevy Silverado
Created on: 2019-05-20
Check out this 1A Auto instructional video if you want to learn how to remove and replace the rear door speaker in your 14-19 Chevy Silverado.
-
step 1 :Removing the Rear Door Panel
- Remove the screw cover in the arm rest handle
- Remove the screw cover behind the door handle
- Remove the 7 mm screw behind the door handle
- Remove the two 7 mm screws in the arm rest handle
- Remove the 7 mm screw at the bottom of the door panel
- Pry the door panel away using trim tools
- Lift the door panel up and off
- Pull the lock rod out of the way
- Disconnect the door handle cable
- Remove the wire plastic retainer
- Disconnect the electrical connector
-
step 2 :Removing the Rear Door Speaker
- Remove the 7 mm screw securing the speaker to the door
- Pull the speaker out
- Disconnect the electrical connector
- Remove the wire retaining clip
-
step 3 :Installing the Rear Door Speaker
- Reconnect the speaker electrical connector
- Replace the wire retaining clip
- Slide the lower part of the speaker into the lower part of the door
- Push to engage the locking clip
- Replace the 7 mm screw
-
step 4 :Replacing the Door Panel
- Slide the window strip off the top of the door panel
- Remove the three mounting clips along the top of the door panel
- Replace those three mounting clips in their positions on the door below the base of the window
- Slide the window strip in place at the base of the window
- Reconnect the door switch electrical connector
- Replace the wire retaining clip
- Replace the door handle cable
- Pass the lock rod through the hole
- Line up the door panel with the locking clips
- Press the door panel in place
- Replace the 7 mm screw behind the door handle
- Replace the two 7 mm screws in the arm rest handle
- Replace the 7 mm screw at the bottom of the door panel
- Replace the screw cover in the arm rest handle
- Replace the screw cover in the door handle
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
7mm Socket
Ratchet
Needle nose pliers
Trim Tool Set
What's up guys? I'm Andy from 1A Auto and this in this video I'm going to show you how to replace a rear door speaker on this 2015 Chevy Silverado.
If you need parts for your vehicle, click the link in the description and head over to 1aauto.com.
Going to take a straight blade screwdriver. There's a little cover right here. Just get in under here, pull that cover off. And then right here is a cover, pull that cover off.
And I'm going to take seven millimeter socket extension and ratchet. Going to take this screw out here and there's two in there and there's also one underneath here. Take all of those out.
Now, we want to take some trim tools. We want to get underneath the door panel. Just pry it out. There's a bunch of clips that hold in it. Like that. Just get those all out and then we can slid the door panel up. Just like that. Pull the lock rod out of the way.
This cable, want to just push down on this button, slide the cable out and then pull the ball out. And this wiring harness, you can pull on that wire retainer, and disconnect the connector right there. Push down, pull it up.
Take a seven millimeter extension and ratchet, remove this bolt right here.
I can just take a little trim tool, pull this off, and slide it out. It slides up. Then on the back side, disconnect the connector right here. Push on the tab. Slide the connector out. Disconnect the wiring harness right here. And there's the speaker.
Now, we're going to reconnect this speaker. Connect the electrical connector and then connect the wiring harness right here. Push that in.
And we want to slide the lower part of the speaker into the bottom part of the door, and then there's a little clip on the backside here. Push that on. Take the bolt, get the bolt started. Take the seven millimeter socket and we'll snug it up.
There's this weather strip piece, or window strip, that goes at the base of the window. You're going to slide this off the door panel. And then there's these little clips. There's three of them. You need to pull those off.
Going to use a trim tool, try to slide these out. Sometimes you need some ... a needle nose pliers. Get in there. Slide that out. What you do is just get in there and just try to squeeze so that you can pull it off. Squeeze that, pull those out.
Now, these clips are going to go right here, just like that. All three. Put the clips on first.
And then we'll take this weather strip or window strip, slide this in position right here, and just press it down. Just like that.
All right. Now, let's hook this switch up. Push the connector on. And this wire is going to go into that. That retainers going through that hole.
Take this cable, put the ball through there, and then slide it over. Lock that in place.
Take the lock rod. You need to slide it out, thread it through the hole. Once that's thread through, you get all these pins lined up. Everything's lined up and can just push the door panel on.
Now, there's four screws we want to put in. There's one right there, two right here, and then one down below. Install those four screws with a seven millimeter socket and extension.
Then I'm going to take a ratchet and just tighten these down, just snug.
I'll take this cover, slide that in there. Lock it in place. There's a cover right here, it does the same. There you go.
Thanks for watching. If you want the parts to do it yourself, check out 1aauto.com, the place for DIY auto repair.
How to Replace Door Speaker 1994-2002 Dodge Ram 1500
Check out this video if you need to replace or upgrade speakers in your 94-02 Dodge Ram!
