How to Replace Rear Door Speaker 2002-08 Dodge Ram
Created on: 2016-04-29
If the rear door speaker needs to be changed, check this video out and learn how to replace it yourself
-
step 1 :Removing the Door Panel
- Remove the 10mm bolt behind the door handle
- Remove the door handle
- Remove the Phillips screw from the door panel
- Lift the door panel up and off
- Disconnect the window switch wiring harness
-
step 2 :Removing the Speaker
- Remove the three Phillips screws from the speaker
- Pull the speaker out
- Disconnect the speaker wiring harness
-
step 3 :Installing the Speaker
- Connect the speaker wiring harness
- Insert the speaker into place
- Tighten the three Phillips screws to the speaker
-
step 4 :Reinstalling the Door Panel
- Remove the door lock bezel
- Connect the window switch wiring harness
- Insert the door panel into place
- Insert the door lock bezel into place
- Tighten the Phillips screw to the door panel
- Insert the door handle into place
- Tighten the 10mm screw to the door handle
Tools needed
-
Socket Extensions
Phillips Head Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and install a rear speaker on a Dodge Ram. The items you'll need include a 10mm socket and ratchet with an extension, and a Phillips screwdriver.
Open up your door. You'll need to remove the inside door handle. There's a 10mm bolt right in here. Remove that. As it's coming off, just pull it right out with the bolt in it. Remove this Phillips screw. Lift up and off. You can bring it up and out. There's a tab right on top of your window switch harness. Pull that off.
Three Phillips screws hold the speaker in place. Remove them. Now remove, pull the speaker out. There's a harness on the speaker. Just press the little tab and disconnect. Pull your harness lead out.
Reconnect. It is magnetic, so it'll want to get stuck on the door. Put it in place. Start your three screws, and tighten them up.
We're going to remove the door lock bezel. Just push in on these tabs, and push it up and off. The two tabs on the bottom, you just kind of preliminarily line up and rest right there. Then, as you bring the panel close, connect to your harness. Push your door lock locked. Push the panel on, and then down into place. Unlock your door. Put the bezel back in place. Reinstall the Phillips screw that holds the panel. Reinstall your door handle. Have your wrench lined up. Basically, work it into place, and tighten it up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
How to Replace Radio Knobs 1995-99 GMC Sierra K1500
How to remove, replace, take out, pull out, change, a broken or old radio on 96 GMC Sierra K1500
