How To Replace Rear Door Panel 2004-08 Ford F150
Created on: 2014-11-01
Check out this video teaching you how to remove or replace the rear interior door panels on your 04-08 Ford F150.
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door handle with a flat blade screwdriver
- Pry up the window switch panel with a flat blade screwdriver
- Disconnect the window switch wiring harnesses
- Pull off the side panel next to the window
- Remove the 6mm bolt next to the window
- Remove the two 8mm bolts inside the door handle
- Remove the 10mm bolt inside the door pull
- Remove the two 6mm bolts at the bottom of the door panel
- Pry out the door panel
- Lift the door panel up and off
- Disconnect the latch cables from the door handle
-
step 2 :Reinstalling the Door Panel
- Connect the latch cables to the door handle
- Lift the door panel into place
- Push in the door panel clips
- Insert the two 6mm bolts at the bottom of the door panel
- Insert the two 8mm bolts inside the door handle
- Insert the 10mm bolt inside the door pull
- Insert the 6mm bolt next to the window
- Connect the window switch wiring harness
- Push in the switch panel
- Push on the trim piece inside the door handle
- Push on the trim panel next to the window
Tools needed
-
Socket Extensions
Flat Blade Screwdriver
6mm Socket
8mm Socket
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace the rear door panel on this 2005 Ford F-150. We show you on the driver's side but the passenger's side is the same procedure. The items you'll need for this are a 6, 8 and 10 millimeter socket and ratchet with anextension; and a flat blade screwdriver.
Pry out on the small panel behind the door handle. Then pry up on this panel, and just pull it forward. Lift it up and push the tab on the harness and disconnect it. Then pull out on this panel and pull it free. It helps to use the flat blade screwdriver and just pry it free. Remove the 6mm bolt, these two 8mm bolts, this 10mm bolt, and then these two 6mm bolts down here. We'll fast-forward as Mike does that. Now lift the door panel up and pull it out. Then you want to pull out your door handle cable. It's easiest with a flat blade screwdriver to pry it out. Then unclip it from the door handle, and your door panel's free.
To replace your door panel, just re-clip the door handle cable into the door handle and then push it back into place. Make sure these clips stay into the door. Then line up the tabs on the back and make sure that the lock rod goes up through the door panel and that your harness for your window switch is coming up through that hole in the door panel. Then push the door panel down into place. We'll fast-forward as Mike replaces all of those bolts. Now replace the small panel behind the door handle, reconnect your window switch, push those tabs into place, and push the panel back down. Then line this panel up, slide it down into the door panel, and push those two clips back into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Car or truck wheel is making a thumping noise Quickly diagnose suspension or tie rod trouble
Are you hearing a thumping noise from your car or truck wheel? You can quickly figure out what is causing the noise if you watch this video!
