How to Replace Rear Door Panel 2001-06 Chrysler Sebring
Created on: 2013-11-08
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video will help you do this, and is applicable to the Chrysler Sebring, years 01, 02, 03, 04, 05, and 06.
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door pull with a flat blade screwdriver
- Pry off the trim piece inside the door handle with a flat blade screwdriver
- Remove the Phillips head screw inside the door pull
- Remove the Phillips head screw inside the door handle
- Remove the two Phillips screws at the bottom of the door panel
- Pry out the door panel with a door panel clip tool or putty knife
- Lift the door panel up and off
- Pry off the door lock rod with a flat blade screwdriver
- Disconnect the window switch wiring harness
-
step 2 :Installing the Door Panel
- Connect the window switch wiring harness
- Insert the door lock rod into the door handle
- Lift the door panel into place
- Push in the door panel clips
- Insert the two Phillips screws at the bottom of the door panel
- Insert the Phillips head screw inside the door pull
- Insert the Phillips head screw inside the door handle
- Push on the trim piece inside the door pull
- Push on the trim piece inside the door handle
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Putty Knife
10mm Socket
Door Panel Removal Tool
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll show you how to remove and replace the rear door panel on this 2004 Chrysler Sebring. The only tools that you're going to need for this process is a flat blade screwdriver, a Phillips screwdriver, and a 10 millimeter socket and ratchet.
To start off, you use your flat blade screwdriver and just pry up these two little trap doors here. As you can see, there's one Phillips screw in there, there's one in there. Down here, there's two more. We'll just fast-forward as Don removes those four Phillips screws. You want to just pry out the panel to release the clips. We'll do this on the other side. Then your door panel will just lift up and off. To the side of the door panel, you'll see this little clip here. With your door handle rod, you'll just want to pry this off with your flat blade screwdriver. Then you want to just push the tab on this harness and disconnect it. Then your door panel is free.
Now, to reinstall your door panel, you just want to push that harness back into place. Then take your door handle rod and put the clip back on to it. You just want to line your door panel up over the walk and hit clips in around the edges. Then we're going to fast-forward as Don replaces these four Phillips screws and closes the two trap doors. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Why You Should Not Recharge Your Truck or Cars AC Yourself
This video discusses DIY A/C recharge kits, and the potential harms you may be doing to your vehicle.
