Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How To Replace Rear Door Panel 02-07 Jeep Liberty

Share on:
  1. step : Removing the Door Panel (0:33)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
  2. step : Installing the Door Panel (1:33)
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw inside the door pull
    • Insert the Phillips head screw inside the door handle
    • Push in the trim piece inside the door handle with a flat blade screwdriver

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to remove and replace the rear door panel on this 2006 Jeep Liberty. We show you on the passenger side, but the driver side is the same procedure. The items you'll need for this is a Phillips screwdriver, a flat blade screwdriver, a 10mm socket and ratchet, and a putty knife.

Start off by prying up this little panel behind your door handle. Then, there's a Phillips screw in there, and one in the pole cup. Just go ahead and remove those. Using a putty knife or flat blade screwdriver, pry out the door panel so you can get your hand behind it. Then near the clips, pull directly out. This will release those clips. Again, find the clip, pull out.

Then when you get to this point, reach in behind the door panel and push those last two clips along the top out. The door panel lifts up and off. Now on the back of your door handle push this clip off your door handle rod and push it down and out.

Now to reinstall the door panel, push your door handle rod back up into the door handle and reclip it. Then put your door panel down over the lock and onto the window sill. Check behind the door panel, and make sure the clips are lined up. Then hit them into place. Then replace those two Phillips screws and that panel behind the door handle.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket


How to Replace Windshield Washer Reservoir 00-06 Chevy Suburban

How to Replace Windshield Washer Reservoir 00-06 Chevy Suburban

Watch this video to learn how to fix a washer fluid leak. The experts at 1A Auto show how to replace the windshield washer fluid reservoir on your 00-06 Chevy Suburban or Tahoe; or GMC Yukon.

Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...