How to Replace Rear Crew Cab Door Panel 2001-04 Nissan Frontier
Created on: 2013-10-17
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video, will help you do this to the Nissan Frontier, model years 2001-2004
-
step 1 :Removing the Door Panel
- Remove the two Phillips head screws below the door panel
- Remove the door pull
- Pry off the door handle bezel
- Pry out the door panel
- Lift the door panel up and off
- Disconnect the window switch wiring harnesses
-
step 2 :Installing the Door Panel
- Connect the window switch wiring harnesses
- Lift the door panel into place
- Push in the door panel clips
- Insert the door pull
- Tighten the two Phillips head screws to the door pull
- Push on the door handle bezel
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall a rear door panel on a 2001 to 2004 Nissan Frontier. It's pretty much the same operation from the left side to the right side. You'll need a Phillips head screwdriver and a small flat blade screwdriver.
Locate the two Phillips heads screws in the door handle there. Remove those with your Phillips head screwdriver. I'll fast-forward as I do that. Using a small flat blade screwdriver, pry between the outer door panel trim and the door handle itself. Pop it free. Get your fingers in between the door panel and the door itself and pry it free of the plastic clips that are holding it on. Press in the tab that holds the connector to the switch.
Going back on with the door panel, you'll notice the plastic clips and the corresponding holes in the door. You want to have those lined up, but first install your connector to your switch back there. Hang the top of the door panel on the door, line up the clips, and then go ahead and give it a couple of taps to seat those. Go ahead and reinstall your door handle/armrest there, and I'll go ahead and fast-forward as I do that. Now reinstall the trim that goes around your door handle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Burnt Fluid Hard to Move Might Be Time to Swap the Transmission
Andy guides you through the process of removing the old transmission and installing a replacement for the GM GMT800 truck and SUV platform
