How to Replace Power Window Switch 1999-2005 Volkswagen Jetta
Created on: 2014-04-01
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 99, 00, 01, 02, 30, 04, 05 Volkswagen Jetta and Golf.
-
step 1 :Removing the Switch Panel
- Pry off the panel inside the door pull with a flat blade screwdriver
- Pull the switch panel up and off
- Disconnect the window switch wiring harness from the switch pack
-
step 2 :Replacing the Window Switch Pack
- Remove the three Phillips screws that connect the switch pack to the switch panel
- Push the new switch pack into the switch panel
- Insert the three Phillips screws into the switch pack
-
step 3 :Reinstalling the Switch Panel
- Connect the window switch wiring harness to the switch pack
- Push the switch panel into place
- Push the door pull panel into place
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the driver's side switch pack on the 2004 Volkswagen Jetta. It's the same part and process on these Jettas from 1999 to 2005. The items you'll need are a new switch pack from 1AAuto.com, a flat blade screwdriver and a Phillips screwdriver. Start off by prying off this back panel right here on the back of your pull handle. Once that's pulled off, you can just lift up on your switch panel and then push the tab on your harness and pull it free.
Now on the back of your switch panel you'll see three Phillips' screws holding your switch back in. We'll fast forward as Don removes these. Now your switch pack lifts up and out. On the left is the old switch pack. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Push your new switch pack into place and then replace those three Phillips' screws. We'll fast forward as Don replaces those and tightens them up.
Now reconnect your harness and then push your switch panel directly down into place. Then lock it into place by pushing this panel in. You want to line it up and push it firmly in. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How To Replace Power Window Switch 2004 Jeep Liberty
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 2004 Jeep Liberty.
