How to Replace Power Window Switch 1998-2002 Toyota Corolla
Created on: 2011-09-23
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on Toyota Corolla, years 98, 99, 01, and 02.
-
step 1 :Removing the Window Switch
- Pry up the power window switch panel with a flat blade screwdriver
- Disconnect the window switch wiring harness
- Remove the three Phillips head screws that hold the switch to the switch panel
-
step 2 :Installing the New Window Switch
- Push the new switch into the switch panel
- Start the three Phillips screws into the switch panel
- Tighten the three Phillips screws
- Connect the window switch wiring harness
- Push the switch panel into the door panel
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, I'm going to show you how to replace the driver's master window switch on this '98 Corolla, the same as any '98 to '02. The indication that your window switch isn't working is when you press it none of the windows make any noise. These can get shorted out by water if you leave your window open. The only tools you'll need are a small flat blade screwdriver and a Phillips screwdriver.
Pry this front corner here up, pull your plate forward and up and out. Now, there's a little button right under here. Press that button. Now the switch is held on to the panel with three Phillips screws. The switch comes off the panel. A brand new switch from 1A Auto is the exact same, just a little cleaner and it will work better. We'll fast forward. Notice I start all three screws first, then kind of do a preliminary tighten with the screwdriver and then tighten them down firm, but don't over-tighten them. With the new switch in, put the back down in first, slide it back, and press it into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Power Window Switch 2001-04 Chrysler Sebring
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 01, 02, 03, 04 Chrysler Sebring.
