How To Replace Power Window Switch 1993-97 Dodge Intrepid
Created on: 2011-08-14
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switchon 93, 94, 95, 96, and 97 Dodge Intrepid models.
-
step 1 :Removing the Power Window Switch
- Pry up the trim with a flat blade screwdriver
- Remove the three Phillips screws from the switch
- Disconnect the wiring harnesses
-
step 2 :Installing the Power Window Switch
- Connect the wiring harness
- Tighten the three Phillips screws from the switch
- Push the trim into place
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to change the drivers' master power window switch on this 1997 Dodge Intrepid. The only tool you'll need is a Phillips screwdriver and a flat head screwdriver.
To replace this master power window switch, lift up gently here, pull off that trim. There are three Phillips screws we'll have to replace. Lift it up and out and there's a button right here. Push on the button and distract it.
Our switch is actually fine. Show you how to do it, reconnect it, back down into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Install Replace Master Power Window Switch Honda Accord 1994-97 1A Auto
Watch this video to learn how to replace the master power window switch on your 94-96 Honda Accord.
