How To Replace Power WIndow and Lock Switch 2002-09 GMC Envoy XL

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the switch pack on this 2003 GMC Envoy XL. The only tool you'll need for this is a flat blade screwdriver. Start off by prying up the back of the switch panel, and then pry up on the front, and pull the switch panel up and out. Then, you want to pry out on these three tabs, and then there's three more on the other side. Then that panel comes off and you can set that aside. Now just push the tabs on these harnesses and disconnect them. For this last few you may need a flat blade screwdriver to just pry upon the tab and remove them.

Now take your new switch pack and push it back into this panel, and then reconnect your harnesses. Then just push the switch panel back down into place.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.