How To Replace Power Mirror Motor 2004-13 Ford F150
Created on: 2014-11-12
Watch this video to learn how to fix power mirrors that won’t adjust. The experts at 1A Auto show how to replace the power mirror motor on your 04-13 Ford F150.
-
step 1 :Removing the Mirror Glass
- Pry out the mirror glass tabs by hand
- If you have heated mirrors, disconnect the wiring harness from the mirror glass
- Pull off the mirror glass
-
step 2 :Removing the Mirror Motor
- Remove the three T10 Torx screws from the mirror
- Disconnect the mirror motor wiring harness
- Pull out the mirror motor
-
step 3 :Installing the Mirror Motor
- Connect the mirror motor wiring harness
- Push the mirror motor into place
- Insert the three T10 screws into the mirror motor
-
step 4 :Installing the Mirror Glass
- If you have heated mirrors, connect the wiring harness to the mirror glass
- Push the mirror glass into place
- Push on the center of the glass to push in the mirror glass tabs
Tools needed
-
T10 Torx Driver
Flat Blade Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side power-mirror motor on this 2005 Ford F150. We show you on the passenger side, but the driver's side is the same procedure. The items you need for this is a new power-mirror motor from 1AAuto.com, T10 Torx Driver, and a flat blade screwdriver.
You can move your mirror glass and then go in behind. There's two tabs on either side, here, and I'll show you that afterwards. You basically reach your fingers in, pull back on one. Reach your fingers into the other side, pull back on that. Then, one more final time from the bottom should do it. Basically, I just reach my fingers in there, pulled up on these tabs here, and then on these tabs. If you have heated mirrors, here, be careful and then disconnect a couple of wires after you get it removed.
Remove these three T10 Torx screws, pry out on the tabs on either side of the harness, and your motor will pull free.
On the left is the old power mirror motor. On the right, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Connect the harness to your new powermirror motor, push it back into place, and then replace those three T10 Torx screws.
Now line up the tabs on your mirror with the motor, and then just push on the center of the glass and it will pop back into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Mirror 1997-99 Toyota 4Runner
If the side view mirror is broken, this video shows what the steps are to replace it
