Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Plate Light Bulb Socket 07-14 Honda Fit

Share on:

How to Replace Plate Light Bulb Socket 07-14 Honda Fit

Created on: 2019-05-21

Learn how to replace the license plate light bulb socket on your 07-14 Honda Fit by watching this video from 1A Auto.

  1. step 1 :Removing the Plate Light Bulb Socket
    • Push the bulb lens to one side and pry it out
    • Disconnect the electrical connector
    • Squeeze the two socket clips to remove it from the lens
    • Repeat on the other side, if necessary
  2. step 2 :Installing the Plate Light Bulb Socket
    • Press the bulb socket into the lens to lock it in
    • Reconnect the electrical connector
    • Press the light back into place in the liftgate
    • Repeat on the other side, if necessary

Tools needed for replacement

  • 1A - No Tools Needed

    No Tools Needed

Installation Video
Watch video

What's up guys? I'm Andy from 1AAuto. In this video I'm going to show you how to replace the plate light bulb socket on this 2010 Honda Fit. If you need parts for your vehicle, click the link in the description and head over to 1AAuto.com.

All right, to remove this lens assembly, this plate light assembly, just take your hand and push it on the driver's side, and you want to push it towards the passenger side, and then pull out. I'm going to have to use a little bit of force here, just like that. This lens, the clip is broken right there, but if you just push it out, get a little force, it is clipped in right there. Slide it down. Disconnect the connector right here. Just push on the lock tab on the connector, slide it out. Just like that.

To take this socket out of the lens, just push on these two little tabs. Slide it out.

We can take the lens, get the lens lined up. This only goes on one way, so this is the more flat side. It's going to go right there. Push it in there, lock it in place. Connect the lens assembly and socket to the connector, just like that.

All right. When we go to reinstall this, we want to slide this side into the driver's side and then clip this piece on. This side is broken on ours, so just be careful. Just get this in position, just like that, and then push it down on the passenger side. Then we can do the same procedure for the other one.

Thanks for watching. Visit 1AAuto.com, your place for DIY auto repairs, for great parts, great service, and more content.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed


How to Bleed your Brakes by Yourself

How to Bleed your Brakes by Yourself

Check out this video to learn how to bleed your brakes and purge your own brake fluid if you have soft brakes or have replaced your brakes. The 1A Auto experts will show you how to safely purge air from your brake system by yourself.

Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...