How to Replace Parking Light 1999-2002 Toyota 4Runner
Created on: 2012-03-10
Find out how to replace a cracked or broken parking light by following the instructions in this how-to video
-
step 1 :Removing the Bulb
- Reach underneath the bumper and turn the socket counterclockwise
- Pull the socket out
- Pull the bulb out
- Place the bulb in
- Place the socket in
- Turn it clockwise to lock
-
step 2 :Removing the Headlight
- Remove the two Phillips screws from the headlight bracket
- Pull the headlight out counterclockwise
- Disconnect the headlight clips with a flat blade screwdriver
-
step 3 :Replacing the Headlight
- Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
- Clip the headlight into the locks, use a flat blade screwdriver and push on the fascia
- Turn the bulb in clockwise
- Replace the Phillips screw into the headlight bracket
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the front bumper-mounted parking light on this '99 Toyota 4Runner. It's the same as any '96 to '02. You'll need a Phillips screwdriver and a flat blade screwdriver.
To service these bumper-mounted parking lights, if you're just looking to change a bulb, you just have to come up and reach up underneath. Right here is the socket. Turn it counterclockwise and pull it out. Okay, there's the bulb. It usually pulls right out of the socket.
Put your replacement one in. Put it back in and turn it clockwise to lock. If you need to replace the entire assembly, you're going to have to remove these two Phillips screws first. We'll just speed it up here as we use a Phillips screwdriver to remove those two screws. Once you get the screws out of the clips, then the light comes right out.
Once you get these screws out, then these little clips, you see the screwdriver. Push up and out. Then push down and out and these clips come out.
The new light from 1A Auto comes with the clips already installed. Put it in place. Get one clip through and make sure both the clips are coming through. Push it in until it locks. If you have a little trouble getting it to lock in place, just take your screwdriver, press on the back of the fascia, push in, and it'll lock. Then connect that there and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
1999-02 Toyota 4Runner Driver & Passenger Side 2 Piece Parking Light Set DIY Solutions LHT05496
- 2 Piece
- (1) Driver Side Parking Light
- (1) Passenger Side Parking Light
How to Replace Corner Light 1998-2000 Volvo S70
Check out this video to learn how to replace the corner light on your 98-00 Volvo C70, S70 or V70!
