Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.

How to Replace Outer Tail Light and Bulb 05-10 Volkswagen Jetta

Share on:

How to Replace Outer Tail Light and Bulb 05-10 Volkswagen Jetta

Created on: 2015-01-20

How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped outer tail light / brake light on 05, 06, 07, 08, 09, 10 Volkswagen Jetta.

  1. step 1 :Servicing the Bulbs
    • Pull out the flap on the panel in the trunk
    • Pull out the tab on the socket assembly
    • Remove the socket assembly
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Push the socket assembly into the light
  2. step 2 :Removing the Tail Light Assembly
    • Disconnect the wiring harness from the socket assembly
    • Remove the two 10mm bolts from the tail light
    • Remove the tail light from the vehicle
  3. step 3 :Installing the New Tail Light Assembly
    • Align the bolts on the tail light with the bolt holes on the vehicle
    • Tighten the two 10mm bolts to the tail light
    • Connect the socket assembly wiring harness
    • Close the flap

Tools needed for replacement

  • Ratchets & Related

    Ratchet

  • Sockets - Metric

    10mm Socket

Installation Video
Watch video

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to service the bulbs as well as replace the entire outer taillight assembly on this 2005 Volkswagen Jetta. We show you on the passenger side, but the driver side is the same procedure. It's the same part and similar process on these Jettas from 2005 to 2007. The items you'll need for this procedure is a new outer tail light from 1AAuto.com, and a 10mm socket and ratchet.

On the back of your tail light in the trunk you'll see these flaps. Just pull this back. Then push up on the tabs on the socket assembly. Then the sockets will pull out.

To service the bulbs, you just push in and twist it counterclockwise and it will pull out. Take your new bulb, push it in, and twist it clockwise to lock it in. This bulb's the same procedure. Then you just push those back into place.

If you're looking to replace the entire assembly, just push the tabs on this harness, disconnect it from the socket, and put the sockets aside. Then remove these two 10mm nuts. We'll just fast-forward as Mike does that. Now pull the tail light assembly free.

On the left is the old tail light assembly; on the right is the new one from 1A Auto. You can see you're identical and they'll fit exactly the same.

Take your new tail light and feed back into place. We'll fast-forward as Mike replaces those two 10mm nuts and tightens them up. Now reconnect the harness to the sockets. Then push the sockets back into the tail light. Close this flap, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

2005 - 2007  Volkswagen  Jetta
Search Videos
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Loading...