How to Replace Mirror Switch 1999-2005 Volkswagen Jetta and Golf
Created on: 2014-04-01
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power mirror switch on 99, 00, 01, 02, 03, 04, 05 Volkswagen Jetta or Golf.
-
step 1 :Removing the Door Panel
- Pry off the door pull panel with a flat blade screwdriver
- Pull the window switch panel up and out
- Disconnect the window switch wiring harness
- Remove the three Phillips head screws from behind the door pull
- Remove the three T20 Torx bolts from the bottom of the door panel
- Remove the Phillips screw from the top front corner of the door panel
- Pry the door panel off by hand
- Pull the door panel up and off of the window sill
- Pull back the door handle latch cable clip with a flat blade screwdriver
- Disconnect the latch cable from the door panel
- Disconnect the wiring harnesses from the door panel with a flat blade screwdriver
-
step 2 :Replacing the Power Mirror Switch
- Pry the three mirror switch tabs with a flat blade screwdriver
- Push the mirror switch out from the back side of the door panel
- Push the new mirror switch into the door panel from the front side
-
step 3 :Reinstalling the Door Panel
- Connect the wiring harnesses to the door panel
- Connect the latch cable to the door handle
- Slide the latch cable clip into place
- Put the door panel in place on the window sill
- Pull the window switch wiring harness through the door pull cavity
- Push the door panel clips in
- Insert the three Phillips screws behind the door pull
- Insert the three T20 Torx Bolts into the bottom of the door panel
- Insert the Phillips screw into the top front corner of the door panel
- Connect the wiring harness to the window switch panel
- Push the switch panel into place
- Push the door pull panel into place
Tools needed
-
Flat Blade Screwdriver
T20 Driver
Phillips Head Screwdriver
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a power mirror switch on this 2004 Volkswagen Jetta and it's the same part and process on these Jettas from '99 to 2005. The items you'll need for this are a new power mirror switch from 1AAuto.com, flat blade screw driver, T20 Torx Bit and ratchet, and a Phillips screwdriver.
Start off by prying off this panel inside your pull handle. Now, lift your switch panel up and out and just push the tab on this harness and disconnect it. Then using a Phillips screwdriver, you want to remove these three Phillips screws and we'll just fast forward as Don removes those. At the bottom of your door panel, you want to remove these three T20 Torx bolts and we'll fast forward as Don removes those. Then just remove this Phillips screw up here in the top corner of the door panel. Reach in behind the door panel and just pull out, release the clips and then lift it up in and out of the window sill and over the lock. Then you want to pull back on this clip and lift the hook up and out of the door handle. Push the tab on this harness and release it. Do the same for this. Push the tabs on either side of this harness and pull it free. Then just push the tabs on the rest of these harnesses and pull them free. Now your door panel is free.
On the back of your door panel, push down on the switch and pry out from these three sides and it will push right through. On the left is the old switch, on the right is the new one. You can see they're very similar and they'll fit exactly the same and work the same. Take your new switch and push it into place.
Now, to reinstall your door panel, you just want to reconnect these harnesses. Then take your door handle rod and you want to hook it back into the door handle and then slide that clip back into the door handle. Now, put the panel up over the lock rod and then down into the window sill. Make sure you pull your harness for your switch back up through and then line up the clips and hit them back into the door. We'll fast forward as Don replaces and tightens up those three Phillips screws. Then replace those three T20s and replace that Phillips screw up in the top corner and tighten it up. Now, reconnect your switch panel and then just push the panel down into place and then line up this panel and push it firmly into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Replace Power Mirror Switch 1997-2003 Ford Expedition
This video shows how to replace the power mirror switch quickly and easily with just a flat blade screwdriver. Watch and learn to DIY
