Menu

1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Mirror 02-06 GMC Envoy XL

Share on:
  1. step : Removing the Door Panel (0:33)
    • Pry out the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Remove the two 10mm bolts from the door pull
    • Pry out the door panel clips with a putty knife
    • Pry off the door panel by hand
    • Pry out the mirror base trim piece by hand
    • Pull the door panel up off the windowsill
  2. step : Removing the Side View Mirror (2:10)
    • Pull off the foam cover from the mirror trim
    • Unclip the mirror wiring from the door
    • Remove the three 10mm nuts from the mirror base studs
    • Push the mirror tab
    • Pull the mirror off, feeding the wiring through the door cavity
  3. step : Installing the New Mirror (2:50)
    • Thread the mirror wiring through the door cavity
    • Push the mirror into place using the tab
    • Fasten the three 10mm bolts onto the mirror base studs
    • Clip the mirror wiring to the door
    • Push the foam padding into the mirror base
  4. step : Reinstalling the Door Panel (3:32)
    • Lift the door panel onto the windowsill
    • Push in the door panel clips
    • Insert the two 10mm bolts into the door panel
    • Hold the bolts in the socket with electrical tape, if necessary
    • Connect the window switch wiring harnesses
    • Push the window switch panel into place

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the side mirrors on this 2003 GMC Envoy XL. It's the same part and similar process on the regular Envoys made after 2002. We show you on the driver side, but the passenger side is the same procedure. The items you need are a new side mirror from 1AAuto.com, flat blade screwdriver, 10mm socket and ratchet, and a putty knife.

Pry up the back of your switch panel with a flat blade screwdriver. Then, pry up the front. Pull the switch panel up and out. Push the tab on these two harnesses on this end and disconnect them. Then, use a flat blade screwdriver and pry up the tab on the remaining harnesses. Next, remove this 10mm bolt in here, and this 10mm bolt right there. We'll fast forward as Mike does this. Using a putty knife, just push this back in behind the door panel and slide it down until you find a clip, and then, just pry out. Then you can reach your fingers back there and just pry out around the edge. Then, just pry out on this small part of the panel up here and lift your door panel up and out of the windowsill and it's free.

Pull out the padding, and then, pull your harness from the door. Make sure the harness is free. Then, remove these three 10mm nuts. We'll just fast forward as Mike does that. Once those are removed, push down on the tab on the inside of the mirror and pull out on the mirror at the same time. Then just pull your harness out of the door and it's free.

On the bottom, is the old mirror. Above it, is the new mirror from 1AAuto. You can see they are identical and they'll fit exactly the same. Feed the harness of your new mirror back through the door. Then, line up the mirror and push it into the door. Once it's clipped in, replace the three nuts and tighten them up. Push the padding back into the door.

To replace your door panel, push the harnesses back through this hole, and then, lift the door panel up and into the windowsill. Once you have that lined up, push it down into place. Then make sure the clips are lined up and then just hit them back in around the sides of the door panel. For these bolts, what you want to do, is be able to hold them into the socket, so use a little bit of glue or any kind of a piece of cloth. I just have a little electrical tape put on the bolt head. Stick it into the socket. That way your screw will stay in there. Then you can just put it right in and start it. We'll just fast forward as Mike replaces and tightens up those two bolts. Reconnect the harnesses to your switch pack. Line up your switch panel and push it back down into place.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Electrical Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

2002 - 2004  Oldsmobile  Bravada
2002 - 2007  GMC  Envoy
2004 - 2005  GMC  Envoy XUV
2002 - 2006  GMC  Envoy XL
2006 - 2007  Isuzu  Ascender
2002 - 2006  Chevrolet  Trailblazer EXT
2002 - 2007  Chevrolet  Trailblazer
2004 - 2007  Buick  Rainier

2002-07 GM Isuzu Mid Size SUV Pwr Htd Mirror Man Fold w/Amber Turn Sig Cvr LH

Chevrolet GMC Buick Olds Isuzu Driver Side Mirror TRQ MRA05654

This part replaces:

  • Partslink GM1320323
  • Hollander 128-2692L 128-4106L 128-4102L
  • OE # 15287075 15789785

Part Details

  • Mirror Signal Type: Amber Turn Signal
  • Mirror Folding Type: Manual-Folding
  • Mirror Memory Type: Memory
  • Mirror Heating Type: Heated
  • Mirror Operation: Power
  • Mirror Color / Finish: Textured Black
Search Videos
Go To Top


Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Loading...