How to Replace Master Window Switch 2008-13 Chevy Suburban
Created on: 2017-06-16
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 07, 08, 09, 10, 11, 12, 13 Chevy Suburban.
-
step 1 :Removing the Window Switch
- Pry up the master switch panel with a trim removal tool
- Disconnect the wiring harnesses
- Remove the three T15 Torx screws from the switch
- Remove the switch
-
step 2 :Installing the Window Switch
- Press the switch into the trim panel
- Tighten the T15 Torx screws
- Connect the wiring harnesses
- Press the master switch panel into the door panel
Tools needed
-
Flat Blade Screwdriver
T15 Torx Driver
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Pull up your trim panel. Use a plastic trim tool, available on 1AAuto.com. Put it in the back, pull up and then work it in at the front as well. You can see that there's two clips at the front and rear. If you don't have a trim tool, but you have strong fingernails, you can get it out. Then just pull straight up on the front as well. Then, there's four harnesses to disconnect, and you might have more if you have more options. Just press the tabs and pull out. Three T15 Torx screws hold it in place. We'll remove those. Once you remove the last one, pull it right out.
The replacement switch from 1A Auto goes right in, and put your T15 screws back in and tighten them up. When you tighten them, you want to get them firm, but don't over tighten. If you over tighten, you risk breaking the bezel that the switch screws into. Switch panel, these all only go in one way. This one won't plug into there, it won't plug into there. It'll only plug into there. This one only plugs into there.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Install Master Power Window Switch 2010-17 Chevy Equinox
Remove an old, stuck, or shorted out master power window switch from your 10-17 Chevy Equinox, and replace it with a new, quality, engineered to fit replacement from TRQ. How to do it yourself.
