1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles

How to Replace Master Window Switch 02-06 Toyota Camry

Share on:
  1. step : Removing the Switch Panel (0:19)
    • Pry the trap door from the pull handle with a screwdriver
    • Remove the Phillips screw from the pull handle
    • Remove the window switch wiring harness
  2. step : Removing the Window Switch (1:18)
    • Remove the three Phillips screws from the window switch
    • Pull the window switch out
  3. step : Installing the New Window Switch (2:05)
    • Place the window switch into place
    • Install the three Phillips screws
  4. step : Reinstalling the Switch Panel (3:17)
    • Reconnect the window switch wiring harness
    • Insert and tighten the Phillips screw to the pull handle
    • Attach the trap door to the pull handle

Brought to you by, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of Thanks.

In this video, we'll be showing you how to replace the driver's master window switch on this '05 Camry. You'll need a Phillips screwdriver and a flat blade screwdriver.

Use your screwdriver. We're just going to put it down in there and pry. It may take a couple tries. Pry that little rubber pad out of there and then there's just a Phillips screw right under there. Remove the Phillips screw. This whole panel lifts right up, back, and out. Underneath, you can disconnect your mirror. There's a little tab right there. Then to disconnect this, there's a tab here, which you pull back on and then disconnect it.

Now, my switch works fine, so I'm just going to show you this, but to change your power window switch, there's three Phillips screws. The switch comes up and off. You'll see this is all one piece. You'll see.

Reinstallation: just reverse the procedure. Plug in your gear harness. There's a little collar that slides. You would pull that way back, then put your connector in, slide it down, and lock it on. It just slides forward and down and in. Put your screw back on.

We hope this video helps you out. Brought to you by, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

2003 - 2008  Toyota  Matrix
2005 - 2006  Toyota  Camry
2005 - 2005  Scion  xA
2002 - 2004  Toyota  Camry
2004 - 2004  Scion  xA
2004 - 2010  Toyota  Sienna

04-05 Scion xA; 04-06 xB; 02-06 Camry LE SE; 03-08 Corolla; 04-10 Sienna Pwr Wdw Sw LF

Toyota Camry Matrix Sienna Scion xA Driver Side Master Power Window Switch DIY Solutions

This part replaces:

  • Dorman 901-705
  • OE # 8482033170
  • OE # 8482012490
  • OE # 8482012491
  • OE # 84820AA050
  • OE # 84820AA070
  • OE # 8482001021
  • DIY Solutions BSS01561
SOLVED Low speed ABS activation Chevy Trucks

SOLVED Low speed ABS activation Chevy Trucks

If the ABS pump engages and the brake pedal presses further than usual and pumps soft and hard, engaging the antilock brakes, this video has a solution

Search Videos
Go To Top

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.