How to Replace Master Power Window Switch 2002-08 Dodge Ram
Created on: 2016-07-07
New Master Power Window Switch from 1AAuto.com How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted master power window switch on 02, 03, 04, 05, 06, 07, 08 Dodge Ram
-
step 1 :Removing the Master Power Window Switch
- Pry the window switch up with a flat blade screwdriver
- Disconnect the wiring harnesses
- Remove the three Phillips screws holding the switch
- Remove the switch
-
step 2 :Installing the Master Power Window Switch
- Insert the switch into the trim
- Tighten the three Phillips head screws
- Connect the wiring harnesses
- Press the master switch into place
Tools needed
-
Flat Blade Screwdriver
No. 2 Phillips Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
Today we're going to be showing you how to replace the master window switch in your 2008 Dodge Ram Quad Cab. This information is the same for the 1500 Quad Cabs from 2002 to 2008, and similar for several other Dodge trucks and SUVs. The tools you're going to need include a flat blade screwdriver flat blade screwdriver or another type of non-marring prying tool, a number two Phillips head screwdriver, and a new master window switch from 1AAuto.com.
Our master window switch is damaged. Somebody's put a screw in the top here to try and hold it all together. Regardless, the process to do this is going to be exactly the same for your vehicle. Pop the switch out of the door panel. Flip it over. Disconnect the harnesses. Using a number two Phillips screwdriver, remove the three screws holding the switch in the bottom of the trim panel. Remove the switch from the trim panel.
As you can see, the old part from our vehicle and our new part from 1A Auto have the exact same designations on them. Still have an automatic setting for your driver's window. Get the same directionals and lettering for the power mirror controls. It’s got the same connections on the back and the same mounting holes on the bottom and the top.
Install your new master window switch into the trim panel. Reinstall the three Phillips head screws. Reconnect the connectors and snap the trim panel back into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
How to Replace Power Window Switch 2000-05 Chevy Monte Carlo
Find out easy replacing the power window switch can be on the 00-05 Chevy Monte Carlo with this how-to video
